Modulated nanostructures are short-range periodic composition fluctuations observed in metals, semiconductors, and ceramic alloys and have an important effect on the mechanical, electrical, and magnetic properties of the materials. Their presence is often attributed to spinodal decomposition. In the past, such modulations have been analyzed using X-ray diffraction, electron diffraction, and diffraction contrast imaging techniques. The investigations gave useful information about the spatial distribution of the modulations but nothing about the composition fluctuation of the modulated structure. In this study, the composition amplitude of the fluctuations was directly measured using STEM Imaging and atomic resolution spectroscopy in small unit cell Au-Pt and Cu-Ti alloys. With the development of field emission sources, aberration correctors, and ADF imaging for STEM microscopes, measuring the amplitude of the modulation directly and examining the diffused interface is possible.Au-Pt alloys, featuring a nearly symmetrical solid-state miscibility gap, and a Cu-Ti alloy with an asymmetrical metastable miscibility gap were chosen for investigation. Three Au-Pt alloys of different compositions were analyzed at a specific temperature for varying aging times. The study successfully employed atomic resolution energy dispersive X-ray spectroscopy (EDS) for Au-Pt alloys and atomic resolution electron energy loss spectroscopy (EELS) for Cu-Ti alloys to measure composition variation and diffused interfaces across modulations. In Au-Pt alloys, it was shown that the wavelength, as well as the composition amplitude of the modulations, increases as the alloy is aged for a longer time. Non-uniform distribution of wavelength and composition amplitude of modulated structures was observed across the samples. Results shows competitive growth mechanisms occurring in nanostructures with a range of wavelengths/amplitudes. Composition of Au-rich and Pt-rich regions deviates significantly from equilibrium at the selected temperature, more aging is necessary to observe coherency loss. Similarly, in Cu-Ti alloys, variations in wavelengths and composition amplitude of modulations were observed, along with clustering and ordering reactions. Ordering was specifically noted in Ti-rich regions of the alloy aged for an extended period. Diffused interfaces were observed in both alloy systems rather than chemically sharp interfaces, and the contrast in HAADF STEM images in both systems was predominantly influenced by strain effects. Hence utilizing HAADF STEM for composition measurement of modulations is impractical due to the impact of strain on HAADF intensity, specifically due to surface relaxation effects.

Photocatalytic water splitting over suspended nanoparticles represents a potential solution for achieving CO2-neutral energy generation and storage. To design efficient photocatalysts, a fundamental understanding of the material’s structure, electronic properties, defects, and how these are controlled via synthesis is essential. Both bulk and nanoscale materials characterization, in addition to various performance metrics, can be combined to elucidate functionality at multiple length scales. In this work, two promising visible light harvesting systems are studied in detail: Pt-functionalized graphitic carbon nitrides (g-CNxHys) and TiO2-supported CeO2-x composites.

Electron energy-loss spectroscopy (EELS) is used to sense variations in the local concentration of amine moieties (defects believed to facilitate interfacial charge transfer) at the surface of a g-CNxHy flake. Using an aloof-beam configuration, spatial resolution is maximized while minimizing damage thus providing nanoscale vibrational fingerprints similar to infrared absorption spectra. Structural disorder in g-CNxHys is further studied using transmission electron microscopy at low electron fluence rates. In-plane structural fluctuations revealed variations in the local azimuthal orientation of the heptazine building blocks, allowing planar domain sizes to be related to the average polymer chain length. Furthermore, competing factors regulating photocatalytic performance in a series of Pt/g-CNxHys is elucidated. Increased polymer condensation in the g-CNxHy support enhances the rate of charge transfer to reactants owing to higher electronic mobility. However, active site densities are over 3x lower on the most condensed g-CNxHy which ultimately limits its H2 evolution rate (HER). Based on these findings, strategies to improve the cocatalyst configuration on intrinsically active supports are given.

In TiO2/CeO2-x photocatalysts, the effect of the support particle size on the bulk
anoscale properties and photocatalytic performance is investigated. Small anatase supports facilitate highly dispersed CeO2-x species, leading to increased visible light absorption and HERs resulting from a higher density of mixed metal oxide (MMO) interfaces with Ce3+ species. Using monochromated EELS, bandgap states associated with MMO interfaces are detected, revealing electronic transitions from 0.5 eV up to the bulk bandgap onset of anatase. Overall, the electron microscopy/spectroscopy techniques developed and applied herein sheds light onto the relevant defects and limiting processes operating within these photocatalyst systems thus suggesting rational design strategies.

Observations of four times ionized iron and nickel (Fe V & Ni V) in the G191-B2B white dwarf spectrum have been used to test for variations in the fine structure constant, α, in the presence of strong gravitational fields. The laboratory wavelengths for these ions were thought to be the cause of inconsistent conclusions regarding the
variation of α as observed through the white dwarf spectrum. This thesis presents 129 revised Fe V wavelengths (1200 Å to 1600 Å) and 161 revised Ni V wavelengths (1200 Å to 1400 Å) with uncertainties of approximately 3 mÅ. A systematic calibration error
is identified in the previous Ni V wavelengths and is corrected in this work. The evaluation of the fine structure variation is significantly improved with the results
found in this thesis.

The importance of lasing cannot be overstated – from improving medicine through surgery uses and industry through laser cutting and micro-wielding (just to name a few), to the development of laser cooling to isolate the first Bose-Einstein condensate in 1995. Not only do the technological benefits encourage research but, as could probably be deduced, lasers are expensive devices. From Ruby crystals to Rubidium gasses, the materials required to construct lasers can be rare and highly specialized. Since the advancement of computer technology, computational physics has proved exceedingly useful. As a combination of both theoretical and experimental physcis, computational physics proves itself invaluable for allowing the testing of various theories and running of experiments in a time efficient and far less expensive way. For the purpose of this paper, having a clear understanding of the computational lasing system allows for simulations that are incredibly expensive or might not even be possible yet, to be conducted and the groundwork to be laid for future theory, experiment, or product.
The response of a molecular sheet with varying densities of simple, two-level system without lasing due to an ultra-short, wideband pulse centered at 2 eV is first investigated. The Fabry-Pérot modes rising from interference are observed, as well as the expected redshift in the transmission and reflection frequencies in the thin molecular sheet regime. Cautions regarding numerical instability and implementation of the Fast Fourier Transform are discussed. Upon activating the lasing levels of the molecules (creating a four-level system), the transmission and refection responses are measured for four combinations of molecular density and molecular sheet thickness. Lasing threshold and saturation phenomenon are observed and a clear lasing region is seen in the Power input/output analysis.
Population inversion is driving force that triggers lasing through stimulated emission. To investigate this, the populations of each of the four molecular energies levels are tracked for the same combinations of parameters in the previous tests. The population inversions and the threshold/saturation phenomena do not correspond to within reasonable limits. Inspection of the population data reveals a highly varied distribution within the molecular, suggesting that the system does not reach steady-state, and therefore and alternate method of analysis will need to be developed.
Having experimented with the simulations above, both the development of appropriate population analysis framework and the investigation of higher order dimensions (2-D and 3-D) will be pursed.

While the use of super-cooled gasses as a tool for the study of macroscopic quantum effects has only become experimentally viable in recent years, theories involing such gasses have existed almost as long as quantum theory itself. Albert Einstein first proposed the concept of what is known today as a Bose-Einstein condensate; the driving principle behind his theory was a deliberate exploitation of the symmetric property of multiparticle bosonic wavefunctions. Specifically, since the Bose-Einstein statistics of bosons dic- tate that any arbitrary number of particles can occupy the same state, it is possible in an extremely low energy environment for particles on the order of Avagadro's number to all condense into the ground state. This state of matter is now called a Bose-Einstein condensate (hereafter referred to as a BEC). This state of matter is interesting because having such a large number of particles in the same state allows for the observation of macroscopic quantum effects.

The OMFIT (One Modeling Framework for Integrated Tasks) modeling environment and the BRAINFUSE module have been deployed on the PPPL (Princeton Plasma Physics Laboratory) computing cluster with modifications that have rendered the application of artificial neural networks (NNs) to the TRANSP databases for the JET (Joint European Torus), TFTR (Tokamak Fusion Test Reactor), and NSTX (National Spherical Torus Experiment) devices possible through their use. This development has facilitated the investigation of NNs for predicting heat transport profiles in JET, TFTR, and NSTX, and has promoted additional investigations to discover how else NNs may be of use to scientists at PPPL. In applying NNs to the aforementioned devices for predicting heat transport, the primary goal of this endeavor is to reproduce the success shown in Meneghini et al. in using NNs for heat transport prediction in DIII-D. Being able to reproduce the results from is important because this in turn would provide scientists at PPPL with a quick and efficient toolset for reliably predicting heat transport profiles much faster than any existing computational methods allow; the progress towards this goal is outlined in this report, and potential additional applications of the NN framework are presented.

In this paper, optimal control routines are applied to an existing problem of electron state transfer to determine if spin information can successfully be moved across a chain of donor atoms in silicon. The additional spin degrees of freedom are introduced into the formulation of the problem as well as the control optimization algorithm. We find a timescale of transfer for spin quantum information across the chain fitting with a t > π/A and t > 2π/A transfer pulse time corresponding with rotation of states on the electron Bloch sphere where A is the electron-nuclear coupling constant. Introduction of a magnetic field weakens transfer
efficiencies at high field strengths and prohibits anti-aligned nuclear states from transferring. We also develop a rudimentary theoretical model based on simulated results and partially validate the characteristic transfer times for spin states. This model also establishes a framework for future work including the introduction of a magnetic field.

This dissertation describes a process for interface capturing via an arbitrary-order, nearly quadrature free, discontinuous Galerkin (DG) scheme for the conservative level set method (Olsson et al., 2005, 2008). The DG numerical method is utilized to solve both advection and reinitialization, and executed on a refined level set grid (Herrmann, 2008) for effective use of processing power. Computation is executed in parallel utilizing both CPU and GPU architectures to make the method feasible at high order. Finally, a sparse data structure is implemented to take full advantage of parallelism on the GPU, where performance relies on well-managed memory operations.

With solution variables projected into a kth order polynomial basis, a k+1 order convergence rate is found for both advection and reinitialization tests using the method of manufactured solutions. Other standard test cases, such as Zalesak's disk and deformation of columns and spheres in periodic vortices are also performed, showing several orders of magnitude improvement over traditional WENO level set methods. These tests also show the impact of reinitialization, which often increases shape and volume errors as a result of level set scalar trapping by normal vectors calculated from the local level set field.

Accelerating advection via GPU hardware is found to provide a 30x speedup factor comparing a 2.0GHz Intel Xeon E5-2620 CPU in serial vs. a Nvidia Tesla K20 GPU, with speedup factors increasing with polynomial degree until shared memory is filled. A similar algorithm is implemented for reinitialization, which relies on heavier use of shared and global memory and as a result fills them more quickly and produces smaller speedups of 18x.

This work presents a spectroscopic study of the thermally enhanced photoinduced electron emission from nitrogen-doped diamond films prepared on p-type silicon substrates. It has been shown that photon-enhanced thermionic emission (PETE) can substantially enhance thermionic emission intensity from a p-type semiconductor. An n-type diamond/p-type silicon structure was illuminated with 400–450 nm light, and the spectra of the emitted electrons showed a work function less than 2 eV and nearly an order of magnitude increase in emission intensity as the temperature was increased from ambient to ∼400 °C. Thermionic emission was negligible in this temperature range. The results are modeled in terms of contributions from PETE and direct photoelectron emission, and the large increase is consistent with a PETE component. The results indicate possible application in combined solar/thermal energy conversion devices.

In this dissertation, combined photo-induced and thermionic electron emission from low work function diamond films is studied through low energy electron spectroscopy analysis and other associated techniques. Nitrogen-doped, hydrogen-terminated diamond films prepared by the microwave plasma chemical vapor deposition method have been the most focused material. The theme of this research is represented by four interrelated issues. (1) An in-depth study describes combined photo-induced and thermionic emission from nitrogen-doped diamond films on molybdenum substrates, which were illuminated with visible light photons, and the electron emission spectra were recorded as a function of temperature. The diamond films displayed significant emissivity with a low work function of ~ 1.5 eV. The results indicate that these diamond emitters can be applied in combined solar and thermal energy conversion. (2) The nitrogen-doped diamond was further investigated to understand the physical mechanism and material-related properties that enable the combined electron emission. Through analysis of the spectroscopy, optical absorbance and photoelectron microscopy results from sample sets prepared with different configurations, it was deduced that the photo-induced electron generation involves both the ultra-nanocrystalline diamond and the interface between the diamond film and metal substrate. (3) Based on results from the first two studies, possible photon-enhanced thermionic emission was examined from nitrogen-doped diamond films deposited on silicon substrates, which could provide the basis for a novel approach for concentrated solar energy conversion. A significant increase of emission intensity was observed at elevated temperatures, which was analyzed using computer-based modeling and a combination of different emission mechanisms. (4) In addition, the electronic structure of vanadium-oxide-terminated diamond surfaces was studied through in-situ photoemission spectroscopy. Thin layers of vanadium were deposited on oxygen-terminated diamond surfaces which led to oxide formation. After thermal annealing, a negative electron affinity was found on boron-doped diamond, while a positive electron affinity was found on nitrogen-doped diamond. A model based on the barrier at the diamond-oxide interface was employed to analyze the results. Based on results of this dissertation, applications of diamond-based energy conversion devices for combined solar- and thermal energy conversion are proposed.