Investigating the Effect of Atmospheric Ozone on Ragweed Pollen

193580-Thumbnail Image.png
Description
Pollen allergies are common in the United States, especially in Arizona. In addition to more people experiencing allergies, the allergies themselves are worse, with people reporting more severe and longer lasting symptoms, after moving to Arizona. Potential reasons behind this

Pollen allergies are common in the United States, especially in Arizona. In addition to more people experiencing allergies, the allergies themselves are worse, with people reporting more severe and longer lasting symptoms, after moving to Arizona. Potential reasons behind this include a longer blooming season in the state, a lack of rain to wash out pollen from the atmosphere, and compounding factors of poor air quality. One significant contributor to poor air quality are high ozone levels in urban areas like Phoenix. The goal of this study is to determine if ozone and pollen interact in a way that changes pollen physically or chemically. Ragweed pollen was placed in a chamber and exposed to low, medium, and high levels of ozone for 6-72 hours corresponding to different exposure doses. Exposed and non-exposed pollen was analyzed for physical changes in the pollen grain using scanning electron microscopy (SEM). Chemical changes were investigated using Fourier Transform Infrared Spectroscopy (FT-IR). Finally, exposed and non-exposed pollen was analyzed for changes in lipid profiles using gas chromatography mass spectrometry (GC/MS). SEM analysis found that when ragweed pollen is exposed to high ozone levels (60-100 ppm, > 48 hours), pollen grains become damaged. The same exposure level results in chemical changes in the pollen that are detectable by FT-IR. A higher ozone dose results in worse physical damage and increased changes in the lipid profile. Future research should study a wider ranges of exposure doses and relate the physicochemical changes to differences in immune response.
Date Created
2024
Agent

Time Temperature Visual Indicators for Cold Chain Tracking of Biospecimens

193383-Thumbnail Image.png
Description
For cold chain tracking systems, precision and versatility across varying time intervals and temperature ranges remain integral to effective application in clinical, commercial, and academic settings. Therefore, while electronic and chemistry/physics based cold chain tracking mechanisms currently exist, both have

For cold chain tracking systems, precision and versatility across varying time intervals and temperature ranges remain integral to effective application in clinical, commercial, and academic settings. Therefore, while electronic and chemistry/physics based cold chain tracking mechanisms currently exist, both have limitations that affect their application across various biospecimens and commercial products, providing the initiative to develop a time temperature visual indicator system that resolves challenges with current cold chain tracking approaches. As a result, a permanganate/oxalic acid time temperature visual indicator system for cold chain tracking has been proposed. At thawing temperatures, the designed permanganate/oxalic acid reaction system undergoes a pink to colorless transition as permanganate, Mn(VII), is reduced to auto-catalytic Mn(II), while oxalate is oxidized to CO2. Therefore, when properly stored and vitrified or frozen, the proposed visual indicator remains pink, whereas exposure to thawing conditions will result in an eventual, time temperature dependent, designed color transition that characterizes compromised biospecimen integrity. To design visual indicator systems for targeted times at specific temperatures, absorbance spectroscopy was utilized to monitor permanganate kinetic curves by absorbance at 525 nm. As a result, throughout the outlined research, the following aims were demonstrated: (i) Design and functionality of 1x (0.5 mM KMnO4) visual indicator systems across various time intervals at temperatures ranging from 25°C to -20°C, (ii) Design and functionality of high concentration, 5x, visual indicator systems across varying targeted time intervals at temperatures ranging from 25°C to 0°C, (iii) Pre-activation stability and long-term stability of the proposed visual indicator systems.
Date Created
2024
Agent

Probing TRPV1 Polymodal Activation: A Study of the Human TRPV1 Voltage-Sensing Like Domain

190763-Thumbnail Image.png
Description
Transient Receptor Potential Vanilloid-1 (TRPV1) is an integral membrane polymodal cation channel involved in various essential biological functions, including thermosensing, thermoregulation, and nociception. Discrete TRPV1 activation modes such as ligand, heat, and proton have been challenging to disentangle. However, dissecting

Transient Receptor Potential Vanilloid-1 (TRPV1) is an integral membrane polymodal cation channel involved in various essential biological functions, including thermosensing, thermoregulation, and nociception. Discrete TRPV1 activation modes such as ligand, heat, and proton have been challenging to disentangle. However, dissecting the polymodal nature of TRPV1 is essential for therapeutic development. The human TRPV1 (hTRPV1) voltage-sensing like domain (VSLD; transmembrane helices S1-S4) contains the canonical vanilloid ligand binding site and significantly contributes to thermosensing. Nuclear magnetic resonance (NMR)-detected studies probe the role of the hTRPV1-VSLD in TRPV1 polymodal function. The hTRPV1-VSLD is identified as an allosteric hub for all three primary TRPV1 activation modes and demonstrates plasticity in chemical ligand modulation. The presented results underscore molecular features in the VSLD that dictate TRPV1 function, highlighting important considerations for future therapeutic design.
Date Created
2023
Agent

Investigating Suspected Light Sensitivity of Potential Opsin Proteins in Pocillopora damicornis

Description

Model organisms like Homo sapiens, Drosophila, and E. coli, while useful to various fields of study, present a problem to the scientific community: many other organisms’ proteins, metabolic processes, and biochemical mechanisms are not as well understood by comparison. Pocillopora

Model organisms like Homo sapiens, Drosophila, and E. coli, while useful to various fields of study, present a problem to the scientific community: many other organisms’ proteins, metabolic processes, and biochemical mechanisms are not as well understood by comparison. Pocillopora damicornis (Pdam), like many other coral organisms, faces environmental stresses and threats to its survival in ocean ecosystems with limited understanding of its biochemical mechanisms, making it difficult to help preserve. However, upon analyzing the symbiotic relationship of Pdam and photosynthetic algae, it was reasoned that the coral organism is capable of detecting light. Following up with results of prior bioinformatics analysis courtesy of Kumar, L., Klein-Seetharaman, J., Et. Al, it was proposed that light sensitive proteins in corals are the following four candidates: 2270, 12246, 629, 19775. If chromophores form and their opsin shifts can be visualized in the case in any of the coral candidate opsin genes, it supports the hypothesis that the proteins are indeed a light sensitive opsin protein. If a light sensitive opsin protein is identified, it provides a direction by which efforts can be directed towards to understand corals at the biochemical level for their preservation in the face of unprecedented threats to sustainability.

Date Created
2023-05
Agent

Visual Indicators of Biospecimen Time-Temperature Exposure

Description

In cold chain tracking systems, accuracy and flexibility across different temperatures ranges plays an integral role in monitoring biospecimen integrity. However, while two common cold chain tracking systems are currently available (electronic and physics/chemical), there is not an affordable cold

In cold chain tracking systems, accuracy and flexibility across different temperatures ranges plays an integral role in monitoring biospecimen integrity. However, while two common cold chain tracking systems are currently available (electronic and physics/chemical), there is not an affordable cold chain tracking mechanism that can be applied to a variety of temperatures while maintaining accuracy for individual vials. Hence, our lab implemented our understanding of biochemical reaction kinetics to develop a new cold chain tracking mechanism using the permanganate/oxalic acid reaction. The permanganate/oxalic acid reaction is characterized by the reduction of permanganate (MnVII) to Mn(II) with Mn(II)-autocatalyzed oxidation of oxalate to CO2, resulting in a pink to colorless visual indicator change when the reaction system is not in the solid state (i.e., frozen or vitrified). Throughout our research, we demonstrate, (i) Improved reaction consistency and accuracy along with extended run times with the implementation of a nitric acid-based labware washing protocol, (ii) Simulated reaction kinetics for the maximum length reaction and 60-minute reaction based on previously developed MATLAB scripts (iii) Experimental reaction kinetics to verify the simulated MATLAB maximum and 60-minute reactions times (iv) Long-term stability of the permanganate/oxalic acid reaction with water or eutectic solutions of sodium perchlorate and magnesium perchlorate at -80°C (v) Reaction kinetics with eutectic solvents, sodium perchlorate and magnesium perchlorate, at 25°C, 4°C, and -8°C (vi) Accelerated reaction kinetics after the addition of varying concentrations of manganese perchlorate (vii) Reaction kinetics of higher concentration reaction systems (5x and 10x; for darker colors), at 25°C (viii) Long-term stability of the 10x higher concentration reaction at -80°C.

Date Created
2022-12
Agent

Photophysical Studies to Advance Fluorescence Applications in Biophysics

161514-Thumbnail Image.png
Description
Fluorescence spectroscopy has been a vital technique in biophysics due to its high sensitivity and specificity. While the recent development of single-molecule (SM) techniques has furthered the molecular-level understanding of complicated biological systems, the full potential of these techniques hinges

Fluorescence spectroscopy has been a vital technique in biophysics due to its high sensitivity and specificity. While the recent development of single-molecule (SM) techniques has furthered the molecular-level understanding of complicated biological systems, the full potential of these techniques hinges on the development and selection of fluorescent probes with customized photophysical properties. Red region probes are inherently desirable as background noise from typical biological systems tends to be at its minimum in this spectral region. The first part of this work studies the photophysical properties of red cyanine dyes to access their usefulness for particular SM applications.Protein-induced fluorescence enhancement (PIFE) based approaches are increasingly being used to investigate DNA-protein interactions at the SM level. However, a key limitation remains the absence of good red PIFE probes. This work investigates the photophysical properties of a red hemicyanine dye (Dy-630) as a potential PIFE probe. Results shed light on optimal design principles for ideal probes for PIFE applications, opening new avenues for the technique’s broad applicability in biophysical studies. Further, the photophysical behavior of two novel cyanine fluorophores in the far-red (rigidized pentacyanine) and near-Infrared (IR) (rigidized heptacyanine) region are studied. Both probes are designed to eliminate a photoisomerization caused non-radiative pathway by rigidization of the cyanine backbone. The rigidized pentacyanine was found to have desired photophysical properties and improved quantum yield, vital for application in super-resolution imaging. For rigidized heptacyanine, in contrast to the prior project, it was found that photoisomerization does not contribute significantly to the deactivation pathway. Thus, this work clarifies the role of photoisomerization on heptamethine cyanine scaffold and will enable future efforts to optimize NIR dyes for diverse applications. The second part of this work aims to answer the fundamental question of how the physics of DNA can impact its biology. To this end, interlinkage between the flexibility of local sequence context and the efficiency of uracil removal by Uracil-DNA glycosylase (UDG) protein is investigated using fluorescent base analogue, 2-Aminopurine (2-AP). In summary, this work focuses on photophysical investigations, the understanding of which is vital for the selection and development of fluorescent probes for biophysical studies.
Date Created
2021
Agent

A Determination of the Sequence-Dependent Kinetic Constants of Uracil-DNA Glycosylase

147857-Thumbnail Image.png
Description

Mutations in the DNA of somatic cells, resulting from inaccuracies in DNA<br/>replication or exposure to harsh conditions (ionizing radiation, carcinogens), may be<br/>loss-of-function mutations, and the compounding of these mutations can lead to cancer.<br/>Such mutations can come in the form of

Mutations in the DNA of somatic cells, resulting from inaccuracies in DNA<br/>replication or exposure to harsh conditions (ionizing radiation, carcinogens), may be<br/>loss-of-function mutations, and the compounding of these mutations can lead to cancer.<br/>Such mutations can come in the form of thymine dimers, N-𝛽 glycosyl bond hydrolysis,<br/>oxidation by hydrogen peroxide or other radicals, and deamination of cytosine to uracil.<br/>However, many cells possess the machinery to counteract the deleterious effects of<br/>such mutations. While eukaryotic DNA repair enzymes decrease the incidence of<br/>mutations from 1 mistake per 10^7 nucleotides to 1 mistake per 10^9 nucleotides, these<br/>mutations, however sparse, are problematic. Of particular interest is a mutation in which<br/>uracil is incorporated into DNA, either by spontaneous deamination of cysteine or<br/>misincorporation. Such mutations occur about one in every 107 cytidine residues in 24<br/>hours. DNA uracil glycosylase (UDG) recognizes these mutations and cleaves the<br/>glycosidic bond, creating an abasic site. However, the rate of this form of DNA repair<br/>varies, depending on the nucleotides that surround the uracil. Most enzyme-DNA<br/>interactions depend on the sequence of DNA (which may change the duplex twist),<br/>even if they only bind to the sugar-phosphate backbone. In the mechanism of uracil<br/>excision, UDG flips the uracil out of the DNA double helix, and this step may be<br/>impaired by base pairs that neighbor the uracil. The deformability of certain regions of<br/>DNA may facilitate this step in the mechanism, causing these regions to be less<br/>mutable. In DNA, base stacking, a form of van der Waals forces between the aromatic<br/>nucleic bases, may make these uracil inclusions more difficult to excise. These regions,<br/>stabilized by base stacking interactions, may be less susceptible to repair by<br/>glycosylases such as UDG, and thus, more prone to mutation.

Date Created
2021-05
Agent

Understanding Fluorescent Protein Photoconversion and Assembly of Spinach Rubisco Activase

158904-Thumbnail Image.png
Description
Proteins function as molecular machines which perform a diverse set of essential jobs. To use these proteins as tools and manipulate them with directed engineering, a deeper understanding of their function and regulation is needed. In the studies presented here,

Proteins function as molecular machines which perform a diverse set of essential jobs. To use these proteins as tools and manipulate them with directed engineering, a deeper understanding of their function and regulation is needed. In the studies presented here, the chemical mechanism of a fluorescent protein and the assembly behavior of a chemo-mechanical protein were explored to better understand their operation. In the first study a photoconvertible fluorescent protein (pcFP) was examined which undergoes a photochemical transformation upon irradiation with blue light resulting in an emission wavelength change from green to red. Photo-transformable proteins have been used in high resolution, subcellular biological imaging techniques, and desires to engineer them have prompted investigations into the mechanism of catalysis in pcFPs. Here, a Kinetic Isotope Effect was measured to determine the rate-limiting step of green-to-red photoconversion in the reconstructed Least Evolved Ancestor (LEA) protein. The results provide insight on the process of photoconversion and evidence for the formation of a long-lived intermediate. The second study presented here focuses on the AAA+ protein Rubisco activase (Rca), which plays a critical role in the removal of inhibitors from the carbon-dioxide fixing enzyme Rubisco. Efforts to engineer Rubisco and Rca can be guided by a deeper understanding of their structure and interactions. The structure of higher plant Rca from spinach, and its interactions with its cognate Rubisco, were investigated through negative-stain electron microscopy (EM) and cryo-EM experiments. Multiple types of higher-order oligomers of plant Rca were imaged which have never been structurally characterized, and the AAA+ core of plant Rca was shown to bind Rubisco side-on, similar to bacterial Rca’s. Higher resolution structures of these aggregates and complexes are needed to make definitive observations on protein-protein interactions. However, the results presented here provide evidence for the formation of regulatory structures and an experimental foundation for future exploration of plant Rca through cryo-EM.
Date Created
2020
Agent

Single-Focus Confocal Data Analysis with Bayesian Nonparametrics

Description
The cell is a dense environment composes of proteins, nucleic acids, as well as other small molecules, which are constantly bombarding each other and interacting. These interactions and the diffusive motions are driven by internal thermal fluctuations. Upon collision, molecules

The cell is a dense environment composes of proteins, nucleic acids, as well as other small molecules, which are constantly bombarding each other and interacting. These interactions and the diffusive motions are driven by internal thermal fluctuations. Upon collision, molecules can interact and form complexes. It is of interest to learn kinetic parameters such as reaction rates of one molecule converting to different species or two molecules colliding and form a new species as well as to learn diffusion coefficients.

Several experimental measurements can probe diffusion coefficients at the single-molecule and bulk level. The target of this thesis is on single-molecule methods, which can assess diffusion coefficients at the individual molecular level. For instance, super resolution methods like stochastic optical reconstruction microscopy (STORM) and photo activated localization microscopy (PALM), have a high spatial resolution with the cost of lower temporal resolution. Also, there is a different group of methods, such as MINFLUX, multi-detector tracking, which can track a single molecule with high spatio-temporal resolution. The problem with these methods is that they are only applicable to very diluted samples since they need to ensure existence of a single molecule in the region of interest (ROI).

In this thesis, the goal is to have the best of both worlds by achieving high spatio-temporal resolutions without being limited to a few molecules. To do so, one needs to refocus on fluorescence correlation spectroscopy (FCS) as a method that applies to both in vivo and in vitro systems with a high temporal resolution and relies on multiple molecules traversing a confocal volume for an extended period of time. The difficulty here is that the interpretation of the signal leads to different estimates for the kinetic parameters such as diffusion coefficients based on a different number of molecules we consider in the model. It is for this reason that the focus of this thesis is now on using Bayesian nonparametrics (BNPs) as a way to solve this model selection problem and extract kinetic parameters such as diffusion coefficients at the single-molecule level from a few photons, and thus with the highest temporal resolution as possible.
Date Created
2020
Agent

Investigating the Effect of Salts and Small Molecule on Dissociation and Association Kinetics of the DNA Processivity Clamps using Fluorescence Techniques

158512-Thumbnail Image.png
Description
In this study, the stability of two protein homo-oligomers, the β clamp (homodimer) from E. coli and the Proliferation Cell Nuclear Antigen (PCNA) from the yeast cell, were characterized. These clamps open through one interface by another protein called clam

In this study, the stability of two protein homo-oligomers, the β clamp (homodimer) from E. coli and the Proliferation Cell Nuclear Antigen (PCNA) from the yeast cell, were characterized. These clamps open through one interface by another protein called clamp loader, which helps it to encircle the DNA template strand. The β clamp protein binds with DNA polymerase and helps it to slide through the template strand and prevents its dissociation from the template strand. The questions need to be to answered in this research are, whether subunit stoichiometry contributes to the stability of the clamp proteins and how does the clamp loader open up the clamp, does it have to exert force on the clamp or does it take advantage of the dynamic behavior of the interface?

The x-ray crystallography structure of the β clamp suggests that there are oppositely charged amino acid pairs present at the interface of the dimer. They can form strong electrostatic interactions between them. However, for Proliferation Cell Nuclear Antigen (PCNA), there are no such charged amino acids present at its interface. High sodium chloride (NaCl) concentrations were used to disrupt the electrostatic interactions at the interface. The role of charged pairs in the clamp interface was characterized by measuring the apparent diffusion times (\tau_{app}) with fluorescence correlation spectroscopy (FCS). However, the dissociation of the Proliferation Cell Nuclear Antigen (PCNA) trimer does not depend on sodium chloride (NaCl) concentration.

In the next part of my thesis, potassium glutamate (KGlu) and glycine betaine (GB) were used to investigate their effect on the stability of both clamp proteins. FCS experiments with labeled β clamp and Proliferation Cell Nuclear Antigen (PCNA) were performed containing different concentrations of potassium glutamate and glycine betaine in the solution, showed that the apparent diffusion time\ {(\tau}_{app}) increases with potassium glutamate and glycine betaine concentrations, which indicate clamps are forming higher-order oligomers. Solute molecules get excluded from the protein surface when the binding affinity of the protein surface for water molecules is more than solutes (potassium glutamate, and glycine betaine), which has a net stabilizing effect on the protein structure.
Date Created
2020
Agent