ASYMMETRIES OF THE LOWER LIMBS AND VERTICAL JUMP LANDING PATTERNS IN DANCERS COMPARED TO NON-DANCERS AND POTENTIAL RISK OF INJURY

137435-Thumbnail Image.png
Description
Dancers tend to injure the anterior cruciate ligament in their left leg more often than the right. It is unclear whether this trend is due to biased choreography or if leg dominance and left versus right asymmetries are contributing factors.

Dancers tend to injure the anterior cruciate ligament in their left leg more often than the right. It is unclear whether this trend is due to biased choreography or if leg dominance and left versus right asymmetries are contributing factors. The purpose of this study was to investigate asymmetries between the left and right leg, in knee abduction during landing, hip external rotation (ER) and internal rotation (IR) strength, and hip ER and IR range of motion in dancers compared to non-dancers. This study aimed to determine whether these asymmetries can be linked to leg dominance, and if this puts one leg at higher risk for ACL injury. Ten dancers and eleven non-dancers performed three maximal effort countermovement vertical jumps off of two feet, as well as three maximal effort single leg jumps on each leg. Knee abduction angles during the landing phase of the jumps were calculated using motion capture data. Maximum isometric hip ER and IR strength was measured at 15, 30, 45, 60, and 90 of knee flexion, and hip ER and IR range of motion was measured at 90 of knee flexion. Contrary to the hypothesis, few significant differences were found between the left and right leg, as well as between dancers and non-dancers. Dancers exhibited significantly greater IR range of motion than non-dancers, and knee abduction angles were greater on the right than left leg during double leg jumps. This opposes the hypothesis that knee abduction angles would be greater in dancers on the left leg. However, significant positive correlations were found
between IR strength and knee abduction angles during single leg jumps on the left leg, suggesting that IR strength may be a contributing factor to knee valgus. Further studies may want to utilize qualitative analyses, more relevant jumping tasks, and a different marker set to elucidate asymmetries of the lower limbs that may truly be present.
Date Created
2013-05
Agent

The Functional Anatomy of the Hindlimb of the Ringtail (Bassariscus astutus)

137308-Thumbnail Image.png
Description
The ringtail (Bassariscus astutus), a member of the Procyonidae, is capable of 180 degrees of hindlimb reversal during headfirst descent down a vertical substrate. The goal of this study was to determine the presence or absence of myological adaptations related

The ringtail (Bassariscus astutus), a member of the Procyonidae, is capable of 180 degrees of hindlimb reversal during headfirst descent down a vertical substrate. The goal of this study was to determine the presence or absence of myological adaptations related to hindlimb reversal in the ringtail. Data for B. astutus are presented, including muscle weights and muscle maps ascertained from the dissection of four hindlimbs. Data from the current study were compared to published accounts of other species capable of hindlimb reversal, including procyonids (raccoon, coati, kinkajou, olingo), a mustelid (marten), palm civet, mongoose, tree squirrel, common tree shrew, and slow loris. Muscle mass data from this study demonstrate that the hip adductors of scansorial mammals are significantly more robust than those of terrestrial mammals, indicating a myological adaptation for climbing, but not necessarily hindlimb reversal. Among hindlimb reversers, the majority exhibit one belly of m. sartorius, the presence of m. extensor digiti I longus, and a fibular origin for m. fibularis longus. These characteristics indicate an emphasis on hip extension, ankle plantarflexion, and pes inversion. However, these characteristics are more likely due to phylogeny than hindlimb reversal because of their presence in closely-related non-reversers. Additional data on families outside of Carnivora may help determine if these myological traits are indeed due to phylogeny. Other myological data, such as moment arms and cross sectional areas, may provide evidence of adaptations for hindlimb reversal.
Date Created
2014-05
Agent

Generating Electricity from Kinetic Energy in Gym Equipment

137196-Thumbnail Image.png
Description
As society's energy crisis continues to become more imminent many industries and niches are seeking a new, sustainable and renewable source of electricity production. Similar to solar, wind and tidal energy, kinetic energy has the potential to generate electricity as

As society's energy crisis continues to become more imminent many industries and niches are seeking a new, sustainable and renewable source of electricity production. Similar to solar, wind and tidal energy, kinetic energy has the potential to generate electricity as an extremely renewable source of energy generation. While stationary bicycles can generate small amounts of electricity, the idea behind this project was to expand energy generation into the more common weight lifting side of exercising. The method for solving this problem was to find the average amount of power generated per user on a Smith machine and determine how much power was available from an accompanying energy generator. The generator consists of three phases: a copper coil and magnet generator, a full wave bridge rectifying circuit and a rheostat. These three phases working together formed a fully functioning controllable generator. The resulting issue with the kinetic energy generator was that the system was too inefficient to serve as a viable system for electricity generation. The electrical production of the generator only saved about 2 cents per year based on current Arizona electricity rates. In the end it was determined that the project was not a sustainable energy generation system and did not warrant further experimentation.
Date Created
2014-05
Agent

The Effect of Resistance Band Training on Power Output

137077-Thumbnail Image.png
Description
Most athletic or daily activities require the use of force production at a given velocity, in other words, power is needed to complete these activities. There are different methods for how this can be done, but the main two are

Most athletic or daily activities require the use of force production at a given velocity, in other words, power is needed to complete these activities. There are different methods for how this can be done, but the main two are heavy resistance training and plyometric training (Kawamori and Haff, 2004). However, resistance bands are another option of training that is available at a low cost and equipment needs. Resistance bands can also be used by athletes and elderly alike, but so far the benefits have barely been studied. Two participants were recruited to be followed as a case study. Both were of college age and were currently recreationally active with no health or musculoskeletal problems. Both participants were given a 35 lb. resistance band and instructed to do four different lower extremity exercises (three sets of four repetitions each) that were designed to target the muscles used for jumping. The study ran for five weeks, requiring three workouts per week separated by at least 24 hours. Participants were tested at three points; initial, halfway, and after all 15 workouts had been completed. Tests included measuring for changes in maximal vertical jump height as well as maximal broad jump. Results showed that both participants were able to increase their vertical jump and broad jump measurements from the initial testing day. Participant one had a 22.95% and 39.40% increase in broad jump and vertical jump respectively. Participant two had a 7.84% and 11.72% increase in broad jump and vertical jump respectively. Based on this study, it would appear that the power training program is effective in producing an increase in power based off the measured performance variables. There may be some effect from familiarity with testing protocol but most likely increased were caused by neural adaptation from speed aspect of program, as well as some increase in force production.
Date Created
2014-05
Agent

A Simpler Method To Evaluate The Knee Adduction Moment During Gait Using Plantar Pressure Measurements

137074-Thumbnail Image.png
Description
Medial compartment knee osteoarthritis (OA) is a disease whose severity has been associated with the peak adduction moment during walking (pKAM). Unfortunately, measuring patients' pKAM to track their therapy progress involves the use of a gait laboratory which is expensive

Medial compartment knee osteoarthritis (OA) is a disease whose severity has been associated with the peak adduction moment during walking (pKAM). Unfortunately, measuring patients' pKAM to track their therapy progress involves the use of a gait laboratory which is expensive and time intensive. This study aimed to develop and assess a regression method to predict the pKAM using only plantar pressure measurements. This approach could greatly reduce the burden of evaluating pKAM.
Date Created
2014-05
Agent

Firefighter Fitness and Injury Prevention

136926-Thumbnail Image.png
Description
Workplace injuries, especially those caused by overexertion, are a significant issue among firefighters. This investigation filmed 8 firefighters during simulated firefighting tasks. A detailed movement analysis for each task was completed and used to infer the prime muscles and injury-prone

Workplace injuries, especially those caused by overexertion, are a significant issue among firefighters. This investigation filmed 8 firefighters during simulated firefighting tasks. A detailed movement analysis for each task was completed and used to infer the prime muscles and injury-prone joints during each task. A comprehensive strength training program was developed from this information to help reduce workplace injuries in firefighters.
Date Created
2014-05
Agent

Comparing the Efficacy of the Total Stabilizing and Posterior Stabilizing Knee Prostheses in Obese and Pre-Obese Females: A Retrospective Cohort Study

136319-Thumbnail Image.png
Description
Obesity is a growing issue in the Western world, as well as other international countries. This is leading to increases in complications associated with obesity. One such complication is osteoarthritis (OA) of load bearing joints that requires surgical treatment by

Obesity is a growing issue in the Western world, as well as other international countries. This is leading to increases in complications associated with obesity. One such complication is osteoarthritis (OA) of load bearing joints that requires surgical treatment by total knee arthroplasty (TKA). Obesity is also associated with an increase in surgical complications that may lead to poor TKA outcomes. Additionally, the female gender is also known to be associated with increased rates of severe, clinical OA. This study was designed to determine the comparative efficacy of two knee implants in the obese female population through retrospective chart review and data analysis. The implants differ in their level of constraint, with the total stabilizing (TS) being more constrained than the posterior stabilizing (PS). We hypothesized that the TS implants would be associated with improved functional outcomes in the obese female population. The TS implant was observed to be associated with earlier improvement of both passive and active range of motion. This implant also showed greater improvement from pre-operative condition in stability, rejecting our null hypothesis and supporting our hypothesis.
Date Created
2015-05
Agent

Oscillation and Reaction Board Techniques for Estimating Inertial Properties of a Below-Knee Prosthesis

Description

The purpose of this study was two-fold: 1) demonstrate a technique that can be used to directly estimate the inertial properties of a below-knee prosthesis, and 2) contrast the effects of the proposed technique and that of using intact limb

The purpose of this study was two-fold: 1) demonstrate a technique that can be used to directly estimate the inertial properties of a below-knee prosthesis, and 2) contrast the effects of the proposed technique and that of using intact limb inertial properties on joint kinetic estimates during walking in unilateral, transtibial amputees. An oscillation and reaction board system was validated and shown to be reliable when measuring inertial properties of known geometrical solids. When direct measurements of inertial properties of the prosthesis were used in inverse dynamics modeling of the lower extremity compared with inertial estimates based on an intact shank and foot, joint kinetics at the hip and knee were significantly lower during the swing phase of walking. Differences in joint kinetics during stance, however, were smaller than those observed during swing. Therefore, researchers focusing on the swing phase of walking should consider the impact of prosthesis inertia property estimates on study outcomes. For stance, either one of the two inertial models investigated in our study would likely lead to similar outcomes with an inverse dynamics assessment.

Date Created
2014-05-01
Agent

Using mechanical strain as a vehicle to direct fibroblasts-mediated myoblast differentiation and myotube function

152948-Thumbnail Image.png
Description
Skeletal muscle injury may occur from repetitive short bursts of biomechanical strain that impair muscle function. Alternatively, variations of biomechanical strain such as those held for long-duration are used by clinicians to repair muscle and restore its function. Fibroblasts embedded

Skeletal muscle injury may occur from repetitive short bursts of biomechanical strain that impair muscle function. Alternatively, variations of biomechanical strain such as those held for long-duration are used by clinicians to repair muscle and restore its function. Fibroblasts embedded within the unifying connective tissue of skeletal muscle experience these multiple and diverse mechanical stimuli and respond by secreting cytokines. Cytokines direct all stages of muscle regeneration including myoblasts differentiation, fusion to form myotubes, and myotube functionality. To examine how fibroblasts respond to variations in mechanical strain that may affect juxtapose muscle, a myofascial junction was bioengineered that examined the interaction between the two cell types. Fibroblasts were experimentally shown to increase myoblast differentiation, and fibroblast biomechanical strain mediated the extent to which differentiation occurred. Intereleukin-6 is a strain-regulated cytokine secreted by fibroblasts was determined to be necessary for fibroblast-mediated myoblast differentiation. Myotubes differentiated in the presence of strained fibroblasts express greater number of acetylcholine receptors, greater acetylcholine receptor sizes, and modified to be more or less sensitive to acetylcholine-induced contraction. This study provides direct evidence that strained and non-strained fibroblasts can serve as a vehicle to modify myoblast differentiation and myotube functionality. Further understanding the mechanisms regulating these processes may lead to clinical interventions that include strain-activated cellular therapies and bioengineered cell engraftment for mediating the regeneration and function of muscle in vivo.
Date Created
2014
Agent

The relationship of club handle twist velocity to selected biomechanical characteristics of the golf drive

152912-Thumbnail Image.png
Description
During the downswing all golfers must roll their forearms and twist the club handle in order to square the club face into impact. Anecdotally some instructors say that rapidly twisting the handle and quickly closing the club face is

During the downswing all golfers must roll their forearms and twist the club handle in order to square the club face into impact. Anecdotally some instructors say that rapidly twisting the handle and quickly closing the club face is the best technique while others disagree and suggest the opposite. World class golfers have swings with a range of club handle twist velocities (HTV) from very slow to very fast and either method appears to create a successful swing. The purpose of this research was to discover the relationship between HTV at impact and selected body and club biomechanical characteristics during a driver swing. Three-dimensional motion analysis methods were used to capture the swings of 94 tour professionals. Pearson product-moment correlation was used to determine if a correlation existed between HTV and selected biomechanical characteristics. The total group was also divided into two sub-groups of 32, one group with the fastest HTV (Hi-HTV) and the other with the slowest HTV (Lo-HTV). Single factor ANOVAs were completed for HTV and each selected biomechanical parameter. No significant differences were found between the Hi-HTV and Lo-HTV groups for both clubhead speed and driving accuracy. Lead forearm supination velocity at impact was found to be significantly different between groups with the Hi-HTV group having a higher velocity. Lead wrist extension velocity at impact, while not being significantly different between groups was found to be positive in both groups, meaning that the lead wrist is extending at impact. Lead wrist ulnar deviation, lead wrist release and trail elbow extension velocities at maximum were not significantly different between groups. Pelvis rotation, thorax rotation, pelvis side bend and pelvis rotation at impact were all significantly different between groups, with the Lo-HTV group being more side bent tor the trail side and more open at impact. These results suggest that world class golfers can successfully use either the low or high HTV technique for a successful swing. From an instructional perspective it is important to be aware of the body posture and wrist/forearm motion differences between the two techniques so as to be consistent when teaching either method.
Date Created
2014
Agent