Iodine and silver ions (Ag+), added as silver fluoride (AgF) or silver nitrate (AgNO3), are currently being used as a biocide to control the spread of bacteria in the water storage tanks of the International Space Station (ISS). Due to the complications of the iodine system, NASA is interested to completely replace iodine with silver and apply it as an antibacterial surface coating on stainless steel (SS) surfaces for biofouling control in extended space missions. However, Ag+ is highly soluble and rapidly dissolves in water, as a result, the coated surface loses its antibacterial properties. The dissolution of NPs into Ag+ and subsequent solubilization reduces its effectivity or extended period application. This study focuses on the in-situ nucleation of silver nanoparticles (AgNP) on stainless steel followed by their partial passivation by the formation of a low solubility silver sulfide (Ag2S), silver bromide (AgBr), and silver iodide (AgI) shell with various concentrations for an increased long-term biofouling performance and a slower silver release over time. Antibacterial activity was evaluated using Pseudomonas aeruginosa. The highest bacterial inactivation (up to 75%) occurred with sulfidized AgNPs as opposed to bromidized (up to 50%) and iodized NPs (up to 60%). Surface analysis by scanning electron microscopy (SEM) showed considerably fewer particles on AgBr and AgI compared to Ag2S-coated samples. Silver iodide was not tested in additional experiments due to its drawbacks and its poor antibacterial performance compared to sulfidized samples. Compared to pristine AgNPs, Ag release from both sulfidized and bromidized NPs was significantly low (16% vs 6% or less) depending on the extent of sulfidation or bromidation. Experiments were also carried out to investigate the effect of passivation on biofilm formation. Biofilm growth was smaller on surfaces treated with 10-3 M Na2S and 10-3 M NaBr compared to the surface of pristine AgNPs. Overall, sulfidation appears to be the most effective option to control biofilm formation on stainless steel. However, future research is needed to verify the effectiveness of sulfidized AgNPs on other metals including Inconel 718 and Titanium 6Al-4V used in the spacecraft potable water systems.