Matching Items (43,913)
Description
In countries of conflict, non-governmental organizations (NGOs) often resort to humanitarian relief. A small number of peace and conflict resolution organizations (P/CROs) engage more directly, through grassroots mediation, elite negotiation and advocacy. This thesis observes the potential for implementing such direct conflict interventions in traditional relief and development organizations. To understand current NGO activities, I examine ten case study organizations in two countries of conflict, Cote d'Ivoire and Somalia. I analyze organizations' rhetorical presentation, their society-level engagement, strategies for intervention, and responses to persistent challenges, such as security, impartiality, collaboration and evaluation. Based on conflict study literature, I make tentative recommendations for NGOs in Cote d'Ivoire and Somalia specifically. I also propose a more general system for classifying NGO peace work: five generations of conflict intervention, each more integrated, direct, and political. Rhetorical, structural and operational changes will help organizations move toward higher generation work.
ContributorsDiddams, Margaret (Author) / Ron, Amit (Thesis advisor) / Friedrich, Patricia (Thesis advisor) / Wang, Lili (Committee member) / Arizona State University (Publisher)
Created2011
Description
The current study explored whether intrinsically religious individuals are able to separate the "sin" from the "sinner" (i.e., separate category membership from behavior) when judging homosexual individuals, or whether they are instead subject to the negativity bias (judgments based solely on category membership) in moral judgments. All effects were expected to occur only for participants high in homophobia. Participants were 305 undergraduate male and female students at a large, public university in the southwestern U.S. Respondents read one of five scenarios that described gay or straight targets who were celibate or engaged in same or opposite sex relationships, then were asked to respond to a series of questions evaluating attitudes and behavioral intentions toward the target. Results revealed that homophobia led to a negativity bias in judgments of gay targets, which was intensified by intrinsic religiosity. However, individuals high on intrinsic religiosity and high on homophobia also differentiated between gay targets based on sexual behavior, such that gay targets who were celibate or in an opposite-sex relationship were rated more favorably than gay targets in a same-sex relationship. These findings demonstrate that the negativity bias and "sin vs. sinner" differentiation may both be occurring for intrinsically religious individuals. The moderating effect of homophobia on the interaction between intrinsic religiosity and judgments of gay and straight targets shows us that religiosity itself is not inherently tolerant or intolerant.
ContributorsFilip-Crawford, Gabrielle (Author) / Nagoshi, Craig T. (Thesis advisor) / Kwan, Virginia S.Y. (Committee member) / Neuberg, Steven L. (Committee member) / Arizona State University (Publisher)
Created2011
Description
Dynamic loading is the term used for one way of optimally loading a transformer. Dynamic loading means the utility takes into account the thermal time constant of the transformer along with the cooling mode transitions, loading profile and ambient temperature when determining the time-varying loading capability of a transformer. Knowing the maximum dynamic loading rating can increase utilization of the transformer while not reducing life-expectancy, delaying the replacement of the transformer. This document presents the progress on the transformer dynamic loading project sponsored by Salt River Project (SRP). A software application which performs dynamic loading for substation distribution transformers with appropriate transformer thermal models is developed in this project. Two kinds of thermal hottest-spot temperature (HST) and top-oil temperature (TOT) models that will be used in the application--the ASU HST/TOT models and the ANSI models--are presented. Brief validations of the ASU models are presented, showing that the ASU models are accurate in simulating the thermal processes of the transformers. For this production grade application, both the ANSI and the ASU models are built and tested to select the most appropriate models to be used in the dynamic loading calculations. An existing application to build and select the TOT model was used as a starting point for the enhancements developed in this work. These enhancements include: Adding the ability to develop HST models to the existing application, Adding metrics to evaluate the models accuracy and selecting which model will be used in dynamic loading calculation Adding the capability to perform dynamic loading calculations, Production of a maximum dynamic load profile that the transformer can tolerate without acceleration of the insulation aging, Provide suitable output (plots and text) for the results of the dynamic loading calculation. Other challenges discussed include: modification to the input data format, data-quality control, cooling mode estimation. Efforts to overcome these challenges are discussed in this work.
ContributorsLiu, Yi (Author) / Tylavksy, Daniel J (Thesis advisor) / Karady, George G. (Committee member) / Ayyanar, Raja (Committee member) / Arizona State University (Publisher)
Created2011
Description
Virtue was a concept of paramount importance in the American founders' republican thought. Without virtue, there could be no liberty, no order, no devotion to the common good, and no republican government. This dissertation examines the concept of virtue at the American founding, particularly virtue in the political thought of Mercy Otis Warren (1728-1814). The most important female intellectual of the Revolutionary generation, Warren wrote passionately about liberty and the beauty of republican ideals. Most important to this study, she consistently advocated the central place of virtue in a free and well-ordered republic. I argue that Warren incorporates three distinct philosophical threads - classical, bourgeois-marketplace, and Christian ideals - in her conception of virtue. I first analyze how Warren uses each of these three threads of virtue throughout her writings. I then examine how she synthesizes these individual threads into a single, cohesive conception of virtue. I argue that Warren consistently merges these ideals into a conception of virtue that she employs to address three pressing political problems of her day: How to motivate reluctant colonists to seek independence; how to check various forms of corruption spreading among the people; and how to counter corruption arising from commercial growth in the new nation. Modern political theorists often argue that these three threads, especially the classical republican and Christian ideals of virtue, are irreconcilable. My analysis shows that to divorce virtue from Christianity in Warren's conception is to rob it of its corrective vigor within republican government. I argue that what Machiavelli and Rousseau wrote out of republican virtue Warren writes back in. In Warren's political thought, virtue serves as the foundation for a stable enduring political system, provides the necessary informal ordering principle for the emerging republic, and offers the means by which the new nation could achieve its millennial destiny.
ContributorsMunsil, Tracy F (Author) / Ball, Terence (Thesis advisor) / Dagger, Richard (Thesis advisor) / Crittenden, William J. (Committee member) / Arizona State University (Publisher)
Created2011
Description
There has been a push to create and implement school wellness policies. Childhood obesity statistics suggest that schools may have an important role to play in promoting wellness. Childhood obesity has become a significant problem in the United States. The percentage of obese children in the United States has more than doubled since 1970, and up to 33% of the children in the United States are currently overweight. Among the 33% of children who are overweight, 25% are obese, and 14% have type 2 diabetes, previously considered to be a condition found only in adults. This mixed-method study with a string qualitative component study examined three aspects of federally mandated local wellness polices. The study investigated the policies themselves, how the policies are understood in the local school setting, with a particular focus on the impact the policies have had on school meals. The bulk of the research data was generated through 8 in-depth interviews. The interviews were conducted with key stakeholders within 2 elementary school districts in Arizona. In addition, the evaluation of 20 local wellness polices was conducted via a rubric scoring system. The primary component found to be lacking in local wellness policies was the evaluation method. Recommendations for school districts include the establishment of a clear method of measurement.
ContributorsCrawford, Sara S (Author) / Mccarty, Teresa L. (Thesis advisor) / Molnar, Alex (Thesis advisor) / Montoya, Araceli (Committee member) / Arizona State University (Publisher)
Created2011
Description
Family adaptation to child developmental disability is a dynamic transactional process that has yet to be tested in a longitudinal, rigorous fashion. In addition, although children with developmental delays frequently have behavior problems, not enough research has examined possible underlying mechanisms in the relation between child developmental delay, adaptation and behavior problems. In the current study, factor analysis examined how best to conceptualize the construct of family adaptation to developmental delay. Also, longitudinal growth curve modeling tested models in which child behavior problems mediated the relation between developmental risk and indices of family adaptation. Participants included 130 typically developing children and their families (Mental Development Index [MDI] > 85) and 104 children with developmental delays and their families (MDI < 85). Data were collected yearly between the ages of three and eight as part of a multi-site, longitudinal investigation examining the interrelations among children's developmental status, family processes, and the emergence of child psychopathology. Results of the current study indicated that adaptation is best conceptualized as a multi-index construct. Different aspects of adaptation changed in unique ways over time, with some facets of adaptation remaining stable while others fluctuated. Child internalizing and externalizing behavior problems were found to decrease over time for both children with developmental delays and typically developing children. Child behavior problems were also found to mediate the relation between developmental risk and family adaptation for over half of the mediation pathways. Significant mediation results indicated that children with developmental delays showed higher early levels of behavior problems, which in turn was associated with more maladaptive adaptation. These findings provide further evidence that families of children with developmental delays experience both positive and more challenging changes in their families over time. This study implies important next steps for research and clinical practice in the area of developmental disability.
ContributorsPedersen y Arbona, Anita (Author) / Crnic, Keith A (Thesis advisor) / Sandler, Irwin (Committee member) / Lemery, Kathryn (Committee member) / Enders, Craig (Committee member) / Arizona State University (Publisher)
Created2011
Description
Traditional methods of environmental regulation and enforcement have been questioned over the last decade. Due to the number of environmental regulations, and subsequent cost of enforcement, governments have begun to incentivize the adoption of environmental management systems (EMSs). These management systems encourage companies to better manage their environmental performance voluntarily. It is the purpose of this study to list the types of government incentives that have been used and categorize them into three groups based off of their characteristics. Ten incentive types were identified and put into three categories; (a) reducing the barriers to EMS adoption; (b) enhancing benefits derived from EMS adoption, and (c) rewarding EMS implementers with reduced enforcement. The research shows that each category of incentives encourages different manufacturing facilities to adopt EMSs. Using data from previously conducted case studies and surveys to determine what type of manufacturing facilities are affected, this study finds that government incentives have been shown to have a measurable impact on the decision makers of manufacturing facilities to adopt an EMS. The study concludes that a combination of traditional environmental regulation used with targeted incentives provide the most efficient use of resources by governments.
ContributorsBlanton, Arnold (Author) / Olson, Larry (Thesis advisor) / Peterson, Danny (Committee member) / Hild, Nicholas (Committee member) / Arizona State University (Publisher)
Created2011
Description
Emission of CO2 into the atmosphere has become an increasingly concerning issue as we progress into the 21st century Flue gas from coal-burning power plants accounts for 40% of all carbon dioxide emissions. The key to successful separation and sequestration is to separate CO2 directly from flue gas (10-15% CO2, 70% N2), which can range from a few hundred to as high as 1000°C. Conventional microporous membranes (carbons/silicas/zeolites) are capable of separating CO2 from N2 at low temperatures, but cannot achieve separation above 200°C. To overcome the limitations of microporous membranes, a novel ceramic-carbonate dual-phase membrane for high temperature CO2 separation was proposed. The membrane was synthesized from porous La0.6Sr0.4Co0.8Fe0.2O3-d (LSCF) supports and infiltrated with molten carbonate (Li2CO3/Na2CO3/K2CO3). The CO2 permeation mechanism involves a reaction between CO2 (gas phase) and O= (solid phase) to form CO3=, which is then transported through the molten carbonate (liquid phase) to achieve separation. The effects of membrane thickness, temperature and CO2 partial pressure were studied. Decreasing thickness from 3.0 to 0.375 mm led to higher fluxes at 900°C, ranging from 0.186 to 0.322 mL.min-1.cm-2 respectively. CO2 flux increased with temperature from 700 to 900°C. Activation energy for permeation was similar to that for oxygen ion conduction in LSCF. For partial pressures above 0.05 atm, the membrane exhibited a nearly constant flux. From these observations, it was determined that oxygen ion conductivity limits CO2 permeation and that the equilibrium oxygen vacancy concentration in LSCF is dependent on the partial pressure of CO2 in the gas phase. Finally, the dual-phase membrane was used as a membrane reactor. Separation at high temperatures can produce warm, highly concentrated streams of CO2 that could be used as a chemical feedstock for the synthesis of syngas (H2 + CO). Towards this, three different membrane reactor configurations were examined: 1) blank system, 2) LSCF catalyst and 3) 10% Ni/y-alumina catalyst. Performance increased in the order of blank system < LSCF catalyst < Ni/y-alumina catalyst. Favorable conditions for syngas production were high temperature (850°C), low sweep gas flow rate (10 mL.min-1) and high methane concentration (50%) using the Ni/y-alumina catalyst.
ContributorsAnderson, Matthew Brandon (Author) / Lin, Jerry (Thesis advisor) / Alford, Terry (Committee member) / Rege, Kaushal (Committee member) / Anderson, James (Committee member) / Rivera, Daniel (Committee member) / Arizona State University (Publisher)
Created2011
Description
Semiconductor manufacturing facilities are very complex and capital intensive in nature. During the lifecycle of these facilities various disciplines come together, generate and use a tremendous amount of building and process information to support various decisions that enable them to successfully design, build and sustain these advanced facilities. However, a majority of the information generated and processes taking place are neither integrated nor interoperable and result in a high degree of redundancy. The objective of this thesis is to build an interoperable Building Information Model (BIM) for the Base-Build and Tool Installation in a semiconductor manufacturing facility. It examines existing processes and data exchange standards available to facilitate the implementation of BIM and provides a framework for the development of processes and standards that can help in building an intelligent information model for a semiconductor manufacturing facility. To understand the nature of the flow of information between the various stakeholders the flow of information between the facility designer, process tool manufacturer and tool layout designer is examined. An information model for the base build and process tool is built and the industry standards SEMI E6 and SEMI E51 are used as a basis to model the information. It is found that applications used to create information models support interoperable industry standard formats such as the Industry Foundation Classes (IFC) and ISO 15926 in a limited manner. A gap analysis has revealed that interoperability standards applicable to the semiconductor manufacturing industry such as the IFC and ISO15926 need to be expanded to support information transfers unique to the industry. Information modeling for a semiconductor manufacturing facility is unique in that it is a process model (Process Tool Information Model) within a building model (Building Information Model), each of them supported more robustly by different interoperability standards. Applications support interoperability data standards specific to the domain or industry they serve but information transfers need to occur between the various domains. To facilitate flow of information between the different domains it is recommended that a mapping of the industry standards be undertaken and translators between them be developed for business use.
ContributorsPindukuri, Shruthi (Author) / Chasey, Allan D (Thesis advisor) / Wiezel, Avi (Committee member) / Mamlouk, Michael (Committee member) / Arizona State University (Publisher)
Created2011
Description
The price based marketplace has dominated the construction industry. The majority of owners use price based practices of management (expectation and decision making, control, direction, and inspection.) The price based/management and control paradigm has not worked. Clients have now been moving toward the best value environment (hire contractors who know what they are doing, who preplan, and manage and minimize risk and deviation.) Owners are trying to move from client direction and control to hiring an expert and allowing them to do the quality control/risk management. The movement of environments changes the paradigm for the contractors from a reactive to a proactive, from a bureaucratic
on-accountable to an accountable position, from a relationship based
on-measuring to a measuring entity, and to a contractor who manages and minimizes the risk that they do not control. Years of price based practices have caused poor quality and low performance in the construction industry. This research identifies what is a best value contractor or vendor, what factors make up a best value vendor, and the methodology to transform a vendor to a best value vendor. It will use deductive logic, a case study to confirm the logic and the proposed methodology.
on-accountable to an accountable position, from a relationship based
on-measuring to a measuring entity, and to a contractor who manages and minimizes the risk that they do not control. Years of price based practices have caused poor quality and low performance in the construction industry. This research identifies what is a best value contractor or vendor, what factors make up a best value vendor, and the methodology to transform a vendor to a best value vendor. It will use deductive logic, a case study to confirm the logic and the proposed methodology.
ContributorsPauli, Michele (Author) / Kashiwagi, Dean (Thesis advisor) / Sullivan, Kenneth (Committee member) / Badger, William (Committee member) / Arizona State University (Publisher)
Created2011