Flocking Modeling, Control, and Optimization of Connected and Automated Vehicles for Safe and Efficient Mobility

In large modern urban areas, traffic congestion and fatality have become two serious problems. To improve the safety and efficiency of ground mobility, one promising solution is the cooperative control of connected and automated vehicle (CAV) systems, which can avoid human drivers’ incapability and errors. Taking advantage of two-dimensional (2D) vehicular control, this dissertation intends to conduct a thorough investigation of the modeling, control, and optimization of CAV systems with flocking control. Flocking is a dynamic swarm congregating behavior of a group of agents with self-organizing features, and flocking control of CAV systems attempts to achieve the maintenance of a small and nearly constant distance among vehicles, speed match, destination cohesion, and collision and obstacle avoidance.

Concerning artificial multi-agent systems, such as mobile robots and CAV systems, a set of engineering performance requirements should be considered in flocking theory for practical applications. In this dissertation, three novel flocking control protocols are studied, which consider convergence speed, permanent obstacle avoidance, and energy efficiency. Furthermore, considering nonlinear vehicle dynamics, a novel hierarchical flocking control framework is proposed for CAV systems to integrate high-level flocking coordination planning and low-level vehicle dynamics control together. On one hand, using 2D flocking theory, the decision making and motion planning of engaged vehicles are produced in a distributed manner based on shared information. On the other hand, using the proposed framework, many advanced vehicle dynamics control methods and tools are applicable. For instance, in the low-level vehicle dynamics control, in addition to path trajectory tracking, the maintenance of vehicle later/yaw stability and rollover propensity mitigation are achieved by using additional actuators, such as all-wheel driving and four-wheel steering, to enhance vehicle safety and efficiency with over-actuated features.

Co-simulations using MATLAB/Simulink and CarSim are conducted to illustrate the performances of the proposed flocking framework and all controller designs proposed in this dissertation. Moreover, a scaled CAV system is developed, and field experiments are also completed to further demonstrate the feasibility of the proposed flocking framework. Consequently, the proposed flocking framework can successfully complete a 2D vehicular flocking coordination. The novel flocking control protocols are also able to accommodate the practical requirements of artificial multi-agent systems by enhancing convergence speed, saving energy consumption, and avoiding permanent obstacles. In addition, employing the proposed control methods, vehicle stability is guaranteed as expected.