Description
This thesis introduces a new robotic leg design with three degrees of freedom that
can be adapted for both bipedal and quadrupedal locomotive systems, and serves as
a blueprint for designers attempting to create low cost robot legs capable of balancing
and walking. Currently, bipedal leg designs are mostly rigid and have not strongly
taken into account the advantages/disadvantages of using an active ankle, as opposed
to a passive ankle, for balancing. This design uses low-cost compliant materials, but
the materials used are thick enough to mimic rigid properties under low stresses, so
this paper will treat the links as rigid materials. A new leg design has been created
that contains three degrees of freedom that can be adapted to contain either a passive
ankle using springs, or an actively controlled ankle using an additional actuator. This
thesis largely aims to focus on the ankle and foot design of the robot and the torque
and speed requirements of the design for motor selection. The dynamics of the system,
including height, foot width, weight, and resistances will be analyzed to determine
how to improve design performance. Model-based control techniques will be used to
control the angle of the leg for balancing. In doing so, it will also be shown that it
is possible to implement model-based control techniques on robots made of laminate
materials.
can be adapted for both bipedal and quadrupedal locomotive systems, and serves as
a blueprint for designers attempting to create low cost robot legs capable of balancing
and walking. Currently, bipedal leg designs are mostly rigid and have not strongly
taken into account the advantages/disadvantages of using an active ankle, as opposed
to a passive ankle, for balancing. This design uses low-cost compliant materials, but
the materials used are thick enough to mimic rigid properties under low stresses, so
this paper will treat the links as rigid materials. A new leg design has been created
that contains three degrees of freedom that can be adapted to contain either a passive
ankle using springs, or an actively controlled ankle using an additional actuator. This
thesis largely aims to focus on the ankle and foot design of the robot and the torque
and speed requirements of the design for motor selection. The dynamics of the system,
including height, foot width, weight, and resistances will be analyzed to determine
how to improve design performance. Model-based control techniques will be used to
control the angle of the leg for balancing. In doing so, it will also be shown that it
is possible to implement model-based control techniques on robots made of laminate
materials.
Details
Title
- Design, Model, and Control of a Low-Cost 3 Degree of Freedom Balancing Laminate Leg with an Actively Controlled Ankle Using Fundamental Controls Concepts
Contributors
- Shafa, Taha A (Author)
- Aukes, Daniel M (Thesis advisor)
- Rogers, Bradley (Committee member)
- Zhang, Wenlong (Committee member)
- Arizona State University (Publisher)
Date Created
The date the item was original created (prior to any relationship with the ASU Digital Repositories.)
2020
Subjects
Resource Type
Collections this item is in
Note
- Masters Thesis Engineering 2020