Matching Items (43,913)
Description
The population of older adults and the percentage of people living in urban areas are both increasing in the U.S. Finding ways to enhance city-dwelling, older adults' social integration, cognitive vitality, and connectedness to nature were conceptualized as critical pathways to maximizing their subjective well-being (SWB) and overall health. Past research has found that gardening is associated with increased social contact and reduced risk of dementia, and that higher levels of social support, cognitive functioning, mindfulness, and connectedness to nature are positively related to various aspects of SWB. The present study was a pilot study to examine the feasibility of conducting a randomized, controlled trial of community gardening and to provide an initial assessment of a new intervention--"Mindful Community Gardening," or mindfulness training in the context of gardening. In addition, this study examined whether community gardening, with or without mindfulness training, enhanced SWB among older adults and increased social support, attention and mindfulness, and connectedness to nature. Fifty community-dwelling adults between the ages of 55 and 79 were randomly assigned to one of three groups: Traditional Community Gardening (TCG), Mindful Community Gardening (MCG), or Wait-List Control. The TCG and MCG arms each consisted of two groups of 7 to 10 participants meeting weekly for nine weeks. TCG involved typical gardening activities undertaken collaboratively. MCG involved the same, but with the addition of guided development of non-judgmental, present-focused awareness. There was a statistically significant increase in different aspects of mindfulness for the TCG and the MCG arms. The interventions did not measurably impact social support, attention, or connectedness to nature in this small, high functioning, pilot sample. Qualitative analysis of interview data from 12 participants in the TCG and MCG groups revealed that both groups helped some participants to better cope with adversity. It was concluded that it is feasible to conduct randomized, controlled trials of community gardening with urban older adults, and considerations for implementing such interventions are delineated.
ContributorsOkvat, Heather Audrey (Author) / Zautra, Alex J. (Thesis advisor) / Davis, Mary C. (Committee member) / Knopf, Richard C. (Committee member) / Okun, Morris A. (Committee member) / Arizona State University (Publisher)
Created2011
Description
A full understanding of material behavior is important for the prediction of residual useful life of aerospace structures via computational modeling. In particular, the influence of rolling-induced anisotropy on fatigue properties has not been studied extensively and it is likely to have a meaningful effect. In this work, fatigue behavior of a wrought Al alloy (2024-T351) is studied using notched uniaxial samples with load axes along either the longitudinal or transverse direction, and center notched biaxial samples (cruciforms) with a uniaxial stress state of equivalent amplitude about the bore. Local composition and crystallography were quantified before testing using Energy Dispersive Spectroscopy and Electron Backscattering Diffraction. Interrupted fatigue testing at stresses close to yielding was performed on the samples to nucleate and propagate short cracks and nucleation sites were located and characterized using standard optical and Scanning Electron Microscopy. Results show that crack nucleation occurred due to fractured particles for longitudinal dogbone/cruciform samples; while transverse samples nucleated cracks by debonded and fractured particles. Change in crack nucleation mechanism is attributed to dimensional change of particles with respect to the material axes caused by global anisotropy. Crack nucleation from debonding reduced life till matrix fracture because debonded particles are sharper and generate matrix cracks sooner than their fractured counterparts. Longitudinal samples experienced multisite crack initiation because of reduced cross sectional areas of particles parallel to the loading direction. Conversely the favorable orientation of particles in transverse samples reduced instances of particle fracture eliminating multisite cracking and leading to increased fatigue life. Cyclic tests of cruciform samples showed that crack growth favors longitudinal and transverse directions with few instances of crack growth 45 degrees (diagonal) to the rolling direction. The diagonal crack growth is attributed to stronger influences of local anisotropy on crack nucleation. It was observed that majority of the time crack nucleation is governed by the mixed influences of global and local anisotropies. Measurements of crystal directions parallel to the load on main crack paths revealed directions clustered near the {110} planes and high index directions. This trend is attributed to environmental effects as a result of cyclic testing in air.
ContributorsMakaš, Admir (Author) / Peralta, Pedro D. (Thesis advisor) / Davidson, Joseph K. (Committee member) / Sieradzki, Karl (Committee member) / Arizona State University (Publisher)
Created2011
Description
The objective of this work is to develop a Stop-Rotor Multimode UAV. This UAV is capable of vertical take-off and landing like a helicopter and can convert from a helicopter mode to an airplane mode in mid-flight. Thus, this UAV can hover as a helicopter and achieve high mission range of an airplane. The stop-rotor concept implies that in mid-flight the lift generating helicopter rotor stops and rotates the blades into airplane wings. The thrust in airplane mode is then provided by a pusher propeller. The aircraft configuration presents unique challenges in flight dynamics, modeling and control. In this thesis a mathematical model along with the design and simulations of a hover control will be presented. In addition, the discussion of the performance in fixed-wing flight, and the autopilot architecture of the UAV will be presented. Also presented, are some experimental "conversion" results where the Stop-Rotor aircraft was dropped from a hot air balloon and performed a successful conversion from helicopter to airplane mode.
ContributorsVargas-Clara, Alvaro (Author) / Redkar, Sangram (Thesis advisor) / Macia, Narciso (Committee member) / Rajadas, John (Committee member) / Arizona State University (Publisher)
Created2011
Description
Optical receivers have many different uses covering simple infrared receivers, high speed fiber optic communication and light based instrumentation. All of them have an optical receiver that converts photons to current followed by a transimpedance amplifier to convert the current to a useful voltage. Different systems create different requirements for each receiver. High speed digital communication require high throughput with enough sensitivity to keep the bit error rate low. Instrumentation receivers have a lower bandwidth, but higher gain and sensitivity requirements. In this thesis an optical receiver for use in instrumentation in presented. It is an entirely monolithic design with the photodiodes on the same substrate as the CMOS circuitry. This allows for it to be built into a focal-plane array, but it places some restriction on the area. It is also designed for in-situ testing and must be able to cancel any low frequency noise caused by ambient light. The area restrictions prohibit the use of a DC blocking capacitor to reject the low frequency noise. In place a servo loop was wrapped around the system to reject any DC offset. A modified Cherry-Hooper architecture was used for the transimpedance amplifier. This provides the flexibility to create an amplifier with high gain and wide bandwidth that is independent of the input capacitance. The downside is the increased complexity of the design makes stability paramount to the design. Another drawback is the high noise associated with low input impedance that decouples the input capacitance from the bandwidth. This problem is compounded by the servo loop feed which leaves the output noise of some amplifiers directly referred to the input. An in depth analysis of each circuit block's noise contribution is presented.
ContributorsLaFevre, Kyle (Author) / Bakkaloglu, Bertan (Thesis advisor) / Barnaby, Hugh (Committee member) / Vermeire, Bert (Committee member) / Arizona State University (Publisher)
Created2011
Description
Titanium dioxide (TiO2) nanomaterial use is becoming more prevalent as is the likelihood of human exposure and environmental release. The goal of this thesis is to develop analytical techniques to quantify the level of TiO2 in complex matrices to support environmental, health, and safety research of TiO2 nanomaterials. A pharmacokinetic model showed that the inhalation of TiO2 nanomaterials caused the highest amount to be absorbed and distributed throughout the body. Smaller nanomaterials (< 5nm) accumulated in the kidneys before clearance. Nanoparticles of 25 nm diameter accumulated in the liver and spleen and were cleared from the body slower than smaller nanomaterials. A digestion method using nitric acid, hydrofluoric acid, and hydrogen peroxide was found to digest organic materials and TiO2 with a recovery of >80%. The samples were measured by inductively coupled plasma-mass spectrometry (ICP-MS) and the method detection limit was 600 ng of Ti. An intratracheal instillation study of TiO2 nanomaterials in rats found anatase TiO2 nanoparticles in the caudal lung lobe of rats 1 day post instillation at a concentration of 1.2 ug/mg dry tissue, the highest deposition rate of any TiO2 nanomaterial. For all TiO2 nanomaterial morphologies the concentrations in the caudal lobes were significantly higher than those in the cranial lobes. In a study of TiO2 concentration in food products, white colored foods or foods with a hard outer shell had higher concentrations of TiO2. Hostess Powdered Donettes were found to have the highest Ti mass per serving with 200 mg Ti. As much as 3.8% of the total TiO2 mass was able to pass through a 0.45 um indicating that some of the TiO2 is likely nanosized. In a study of TiO2 concentrations in personal care products and paints, the concentration of TiO2 was as high as 117 ug/mg in Benjamin Moore white paint and 70 ug/mg in a Neutrogena sunscreen. Greater than 6% of Ti in one sunscreen was able to pass through a 0.45 um filter. The nanosized TiO2 in food products and personal care products may release as much as 16 mg of nanosized TiO2 per individual per day to wastewater.
ContributorsWeir, Alex Alan (Author) / Westerhoff, Paul K (Thesis advisor) / Hristovski, Kiril (Committee member) / Herckes, Pierre (Committee member) / Arizona State University (Publisher)
Created2011
Description
The Wechsler Intelligence Scale for Children – ; Fourth Edition (WISC – IV) is one of the most popular intelligence tests used for special education eligibility purposes in the United States. Despite the large prevalence of children and adolescents with Attention Deficit Hyperactivity Disorder (ADHD), the factor structure of the WISC – IV among this population has not been explored. Thus, the factor structure of WISC – IV scores among students with ADHD was investigated via replicatory factor analysis followed by a comparison with the factorial structure of the normative sample using the coefficient of congruence. The four factor model proposed by Wechsler was consistent with the factor structure found in the sample of students with ADHD for all subtests except Picture Concepts and Matrix Reasoning. The Verbal Comprehension and Processing Speed factors appeared to measure the same construct in the study sample as in the normative sample, while the Perceptual Reasoning and Working Memory factors were only fairly similar to the normative sample. It is recommended that clinicians interpret Perceptual Reasoning and Working Memory index scores of students with ADHD cautiously. Limitations of the study, future directions for research, and implications for practitioners are discussed.
ContributorsBoehm, Michelle (Author) / Watkins, Marley (Thesis advisor) / Sullivan, Amanda (Committee member) / Caterino, Linda C. (Committee member) / Arizona State University (Publisher)
Created2011
Description
A potential new class of cancer chemotherapeutic agents has been synthesized by varying the 2 position of a benzimidazole based extended amidine. Compounds 6-amino-2-chloromethyl-4-imino-1-(2-methansulfonoxyethyl)-5-methyl-1H-benzimidazole-7-one (1A) and 6-amino-2-hydroxypropyl-4-imino-1-(2-methansulfonoxyethyl)-5-methyl-1H-benzimidazole-7-one (1B) were assayed at the National Cancer Institute's (NCI) Developmental Therapeutic Program (DTP) and found to be cytotoxic at sub-micromolar concentrations, and have shown between a 100 and a 1000-fold increase in specificity towards lung, colon, CNS, and melanoma cell lines. These ATP mimics have been found to correlate with sequestosome 1 (SQSTM1), a protein implicated in drug resistance and cell survival in various cancer cell lines. Using the DTP COMPARE algorithm, compounds 1A and 1B were shown to correlate to each other at 77%, but failed to correlate with other benzimidazole based extended amidines previously synthesized in this laboratory suggesting they operate through a different biological mechanism.
ContributorsDarzi, Evan (Author) / Skibo, Edward (Thesis advisor) / Gould, Ian (Committee member) / Francisco, Wilson (Committee member) / Arizona State University (Publisher)
Created2011
ContributorsSong, Yiqian (Performer) / Hankins, Kim (Performer) / Pendleton, Aaron (Performer) / Miller, Isaac (Performer) / Hsu, Gabrielle (Performer) / ASU Library. Music Library (Publisher)
Created2018-04-08
Description
This study utilized ecological theory and social exchange theory to examine how father involvement effects the human capital accumulation of young mothers. This study used data from a sub-sample of young mothers taken from the Healthy Families Arizona longitudinal evaluation (N = 84). The participants in the sub-sample were between 13 and 21 years of age. Using a random effects regression model, it was found that father involvement negatively affects a young mother's school attendance over time. The probability of a mother attending school when the father is involved decreases by 12%. It was also found that for the average age mother (19 years of age), the probability of attending school decreases by 59% every additional year. Furthermore, for a mother with an average number of children (one child), every additional child she has decreases the probability of attending school by 24%. In addition it was found that for the average age mother (19 years of age) every additional year, the likelihood of being employed increases 2.9 times, and for a mother with an average number of children (one child) every additional child decreases the likelihood of employment by .88 times.
ContributorsRojas, Rose (Author) / Krysik, Judy (Thesis advisor) / Shapiro, Alyson (Committee member) / Lecroy, Craig (Committee member) / Arizona State University (Publisher)
Created2011
Description
Geoscience educators commonly teach geology by projecting a photograph in front of the class. Geologic photographs often contain animals, people, and inanimate objects that help convey the scale of features in the photograph. Although scale items seem innocuous to instructors and other experts, the presence of such items is distracting and has a profound effect on student learning behavior. To evaluate how students visually interact with distracting scale items in photographs and to determine if cueing or signaling is an effective means to direct students to pertinent information, students were eye tracked while looking at geologically-rich photographs. Eye-tracking data revealed that learners primarily looked at the center of an image, focused on faces of both humans and animals if they were present, and repeatedly returned to looking at the scale item (distractor) for the duration an image was displayed. The presence of a distractor caused learners to look at less of an image than when a distractor was not present. Learners who received signaling tended to look at the distractor less, look at the geology more, and surveyed more of the photograph than learners who did not receive signaling. The San Antonio area in the southern part of the Baja California Peninsula is host to hydrothermal gold deposits. A field study, including drill-core analysis and detailed geologic mapping, was conducted to determine the types of mineralization present, the types of structures present, and the relationship between the two. This investigation revealed that two phases of mineralization have occurred in the area; the first is hydrothermal deposition of gold associated with sulfide deposits and the second is oxidation of sulfides to hematite, goethite, and jarosite. Mineralization varies as a function of depth, whereas sulfides occurring at depth, while minerals indicative of oxidation are limited to shallow depths. A structural analysis revealed that the oldest structures in the study area include low-grade to medium-grade metamorphic foliation and ductile mylonitic shear zones overprinted by brittle-ductile mylonitic fabrics, which were later overprinted by brittle deformation. Both primary and secondary mineralization in the area is restricted to the later brittle features. Alteration-bearing structures have an average NNW strike consistent with northeast-southwest-directed extension, whereas unaltered structures have an average NNE strike consistent with more recent northwest-southeast-directed extension.
ContributorsCoyan, Joshua (Author) / Reynolds, Stephen (Thesis advisor) / Arrowsmith, Ramon (Committee member) / Chi, Michelene (Committee member) / Piburn, Michael (Committee member) / Semken, Steven (Committee member) / Arizona State University (Publisher)
Created2011