Matching Items (43,913)
Description
Semiconductor nanowires (NWs) are one dimensional materials and have size quantization effect when the diameter is sufficiently small. They can serve as optical wave guides along the length direction and contain optically active gain at the same time. Due to these unique properties, NWs are now very promising and extensively studied for nanoscale optoelectronic applications. A systematic and comprehensive optical and microstructural study of several important infrared semiconductor NWs is presented in this thesis, which includes InAs, PbS, InGaAs, erbium chloride silicate and erbium silicate. Micro-photoluminescence (PL) and transmission electron microscope (TEM) were utilized in conjunction to characterize the optical and microstructure of these wires. The focus of this thesis is on optical study of semiconductor NWs in the mid-infrared wavelengths. First, differently structured InAs NWs grown using various methods were characterized and compared. Three main PL peaks which are below, near and above InAs bandgap, respectively, were observed. The octadecylthiol self-assembled monolayer was employed to passivate the surface of InAs NWs to eliminate or reduce the effects of the surface states. The band-edge emission from wurtzite-structured NWs was completely recovered after passivatoin. The passivated NWs showed very good stability in air and under heat. In the second part, mid-infrared optical study was conducted on PbS wires of subwavelength diameter and lasing was demonstrated under optical pumping. The PbS wires were grown on Si substrate using chemical vapor deposition and have a rock-salt cubic structure. Single-mode lasing at the wavelength of ~3000-4000 nm was obtained from single as-grown PbS wire up to the temperature of 115 K. PL characterization was also utilized to demonstrate the highest crystallinity of the vertical arrays of InP and InGaAs/InP composition-graded heterostructure NWs made by a top-down fabrication method. TEM-related measurements were performed to study the crystal structures and elemental compositions of the Er-compound core-shell NWs. The core-shell NWs consist of an orthorhombic-structured erbium chloride silicate shell and a cubic-structured silicon core. These NWs provide unique Si-compatible materials with emission at 1530 nm for optical communications and solid state lasers.
ContributorsSun, Minghua (Author) / Ning, Cun-Zheng (Thesis advisor) / Yu, Hongbin (Committee member) / Carpenter, Ray W. (Committee member) / Johnson, Shane (Committee member) / Arizona State University (Publisher)
Created2011
Description
Galaxies with strong Lyman-alpha (Lya) emission line (also called Lya galaxies or emitters) offer an unique probe of the epoch of reionization - one of the important phases when most of the neutral hydrogen in the universe was ionized. In addition, Lya galaxies at high redshifts are a powerful tool to study low-mass galaxy formation. Since current observations suggest that the reionization is complete by redshift z~ 6, it is therefore necessary to discover galaxies at z > 6, to use their luminosity function (LF) as a probe of reionization. I found five z = 7.7 candidate Lya galaxies with line fluxes > 7x10-18 erg/s/cm/2 , from three different deep near-infrared (IR) narrowband (NB) imaging surveys in a volume > 4x104Mpc3. From the spectroscopic followup of four candidate galaxies, and with the current spectroscopic sensitivity, the detection of only the brightest candidate galaxy can be ruled out at 5 sigma level. Moreover, these observations successfully demonstrate that the sensitivity necessary for both, the NB imaging as well as the spectroscopic followup of z~ 8 Lya galaxies can be reached with the current instrumentation. While future, more sensitive spectroscopic observations are necessary, the observed Lya LF at z = 7.7 is consistent with z = 6.6 LF, suggesting that the intergalactic medium (IGM) is relatively ionized even at z = 7.7, with neutral fraction xHI≤ 30%. On the theoretical front, while several models of Lya emitters have been developed, the physical nature of Lya emitters is not yet completely known. Moreover, multi-parameter models and their complexities necessitates a simpler model. I have developed a simple, single-parameter model to populate dark mater halos with Lya emitters. The central tenet of this model, different from many of the earlier models, is that the star-formation rate (SFR), and hence the Lya luminosity, is proportional to the mass accretion rate rather than the total halo mass. This simple model is successful in reproducing many observable including LFs, stellar masses, SFRs, and clustering of Lya emitters from z~ 3 to z~ 7. Finally, using this model, I find that the mass accretion, and hence the star-formation in > 30% of Lya emitters at z~ 3 occur through major mergers, and this fraction increases to ~ 50% at z~7.
ContributorsShet Tilvi, Vithal (Author) / Malhotra, Sangeeta (Thesis advisor) / Rhoads, James (Committee member) / Scannapieco, Evan (Committee member) / Young, Patrick (Committee member) / Jansen, Rolf (Committee member) / Arizona State University (Publisher)
Created2011
Description
Multiphase flows are an important part of many natural and technological phe- nomena such as ocean-air coupling (which is important for climate modeling) and the atomization of liquid fuel jets in combustion engines. The unique challenges of multiphase flow often make analytical solutions to the governing equations impos- sible and experimental investigations very difficult. Thus, high-fidelity numerical simulations can play a pivotal role in understanding these systems. This disserta- tion describes numerical methods developed for complex multiphase flows and the simulations performed using these methods. First, the issue of multiphase code verification is addressed. Code verification answers the question "Is this code solving the equations correctly?" The method of manufactured solutions (MMS) is a procedure for generating exact benchmark solutions which can test the most general capabilities of a code. The chief obstacle to applying MMS to multiphase flow lies in the discontinuous nature of the material properties at the interface. An extension of the MMS procedure to multiphase flow is presented, using an adaptive marching tetrahedron style algorithm to compute the source terms near the interface. Guidelines for the use of the MMS to help locate coding mistakes are also detailed. Three multiphase systems are then investigated: (1) the thermocapillary motion of three-dimensional and axisymmetric drops in a confined apparatus, (2) the flow of two immiscible fluids completely filling an enclosed cylinder and driven by the rotation of the bottom endwall, and (3) the atomization of a single drop subjected to a high shear turbulent flow. The systems are simulated numerically by solving the full multiphase Navier- Stokes equations coupled to the various equations of state and a level set interface tracking scheme based on the refined level set grid method. The codes have been parallelized using MPI in order to take advantage of today's very large parallel computational architectures. In the first system, the code's ability to handle surface tension and large tem- perature gradients is established. In the second system, the code's ability to sim- ulate simple interface geometries with strong shear is demonstrated. In the third system, the ability to handle extremely complex geometries and topology changes with strong shear is shown.
ContributorsBrady, Peter, Ph.D (Author) / Herrmann, Marcus (Thesis advisor) / Lopez, Juan (Thesis advisor) / Adrian, Ronald (Committee member) / Calhoun, Ronald (Committee member) / Chen, Kangping (Committee member) / Arizona State University (Publisher)
Created2011
Description
The literature on hopelessness suggests youth living amid impoverished conditions, social disorganization, and limited resources are more likely to experience increased feelings of hopelessness. Similarly, many of the aforementioned aspects are considered, in some capacity, in the research on gangs. Though a considerable amount of gang literature alludes to the fact that loss of hope may be present, it neither directly addresses it nor references it. This study attempts to converge the present literature on hopelessness among minority youth to minority youth in street gangs. This is done using data obtained from an earlier evaluation of the Mesa Gang Intervention Project, using self-report data from 197 youth, asking questions about socio-demographic information, gang activity, education, employment, crime and delinquency, family and individual crisis, and self-reported detention. Findings implicate a connection exists between gang membership and increased levels of hopelessness. Moreover, results suggest education and self-esteem help to reduce loss of hopelessness.
ContributorsRedner-Vera, Erica N (Author) / Katz, Charles M. (Thesis advisor) / Decker, Scott (Committee member) / Roe-Sepowitz, Dominique (Committee member) / Arizona State University (Publisher)
Created2011
Description
The past two decades have been monumental in the advancement of microchips designed for a diverse range of medical applications and bio-analysis. Owing to the remarkable progress in micro-fabrication technology, complex chemical and electro-mechanical features can now be integrated into chip-scale devices for use in biosensing and physiological measurements. Some of these devices have made enormous contributions in the study of complex biochemical processes occurring at the molecular and cellular levels while others overcame the challenges of replicating various functions of human organs as implant systems. This thesis presents test data and analysis of two such systems. First, an ISFET based pH sensor is characterized for its performance in a continuous pH monitoring application. Many of the basic properties of ISFETs including I-V characteristics, pH sensitivity and more importantly, its long term drift behavior have been investigated. A new theory based on frequent switching of electric field across the gate oxide to decrease the rate of current drift has been successfully implemented with the help of an automated data acquisition and switching system. The system was further tested for a range of duty cycles in order to accurately determine the minimum length of time required to fully reset the drift. Second, a microfluidic based vestibular implant system was tested for its underlying characteristics as a light sensor. A computer controlled tilt platform was then implemented to further test its sensitivity to inclinations and thus it‟s more important role as a tilt sensor. The sensor operates through means of optoelectronics and relies on the signals generated from photodiode arrays as a result of light being incident on them. ISFET results show a significant drop in the overall drift and good linear characteristics. The drift was seen to reset at less than an hour. The photodiodes show ideal I-V comparison between photoconductive and photovoltaic modes of operation with maximum responsivity at 400nm and a shunt resistance of 394 MΩ. Additionally, post-processing of the tilt sensor to incorporate the sensing fluids is outlined. Based on several test and fabrication results, a possible method of sealing the open cavity of the chip using a UV curable epoxy has been discussed.
ContributorsMamun, Samiha (Author) / Christen, Jennifer Blain (Thesis advisor) / Goryll, Michael (Committee member) / Yu, Hongyu (Committee member) / Arizona State University (Publisher)
Created2011
Description
Natural products that target the DNA of cancer cells have been an important source of knowledge and understanding in the development of anticancer chemotherapeutic agents. Bleomycin (BLM) exemplifies this class of DNA damaging agent. The ability of BLM to chelate metal ions and effect oxidative damage of the deoxyribose sugar moiety of DNA has been studied extensively for four decades. Here, the study of BLM A5 was conducted using a previously isolated library of hairpin DNAs found to bind strongly to metal free BLM. The ability of BLM to effect single-stranded was then extensively characterized on both the 3′ and 5′-arms of the hairpin DNAs. The strongly bound DNAs were found to be efficient substrates for Fe·BLM A5-mediated cleavage. Surprisingly, the most prevalent site of damage by BLM was found to be a 5′-AT-3′ dinucleotide sequence. This dinucleotide sequence and others generally not cleaved by BLM when examined using arbitrarily chosen DNA substrate were found in examining the library of ten hairpin DNAs. In total, 111 sites of DNA damage were found to be produced by exposure of the hairpin DNA library to Fe·BLM A5. Also, an assay was developed with which to test the propensity of the hairpin DNAs to undergo double stranded DNA damage. Adapting methods previously described by the Povirk laboratory, one hairpin was characterized using this method. The results were in accordance with those previously reported.
ContributorsSegerman, Zachary (Author) / Hecht, Sidney M. (Thesis advisor) / Levitus, Marcia (Committee member) / Ghirlanda, Giovanna (Committee member) / Arizona State University (Publisher)
Created2011
Description
Micro-electro-mechanical systems (MEMS) film bulk acoustic resonator (FBAR) demonstrates label-free biosensing capabilities and is considered to be a promising alternative of quartz crystal microbalance (QCM). FBARs achieve great success in vacuum, or in the air, but find limited applications in liquid media because squeeze damping significantly degrades quality factor (Q) and results in poor frequency resolution. A transmission-line model shows that by confining the liquid in a thickness comparable to the acoustic wavelength of the resonator, Q can be considerably improved. The devices exhibit damped oscillatory patterns of Q as the liquid thickness varies. Q assumes its maxima and minima when the channel thickness is an odd and even multiple of the quarter-wavelength of the resonance, respectively. Microfluidic channels are integrated with longitudinal-mode FBARs (L-FBARs) to realize this design; a tenfold improvement of Q over fully-immersed devices is experimentally verified. Microfluidic integrated FBAR sensors have been demonstrated for detecting protein binding in liquid and monitoring the Vroman effect (the competitive protein adsorption behavior), showing their potential as a promising bio-analytical tool. A contour-mode FBAR (C-FBAR) is developed to further improve Q and to alleviate the need for complex integration of microfluidic channels. The C-FBAR consists of a suspended piezoelectric ring made of aluminum nitride and is excited in the fundamental radial-extensional mode. By replacing the squeeze damping with shear damping, high Qs (189 in water and 77 in human whole blood) are obtained in semi-infinite depth liquids. The C-FBAR sensors are characterized by aptamer - thrombin binding pairs and aqueous glycerine solutions for mass and viscosity sensing schemes, respectively. The C-FBAR sensor demonstrates accurate viscosity measurement from 1 to 10 centipoise, and can be deployed to monitor in-vitro blood coagulation processes in real time. Results show that its resonant frequency decreases as the viscosity of the blood increases during the fibrin generation process after the coagulation cascade. The coagulation time and the start/end of the fibrin generation are quantitatively determined, showing the C-FBAR can be a low-cost, portable yet reliable tool for hemostasis diagnostics.
ContributorsXu, Wencheng (Author) / Chae, Junseok (Thesis advisor) / Phillips, Stephen (Committee member) / Cao, Yu (Committee member) / Kozicki, Michael (Committee member) / Arizona State University (Publisher)
Created2011
Description
The Native American population is severely underrepresented in empirical test validity research despite being overrepresented in special education programs and at an increased risk for special educational evaluation. This study is the first to investigate the structural validity of the Wechsler Intelligence Scale for Children - Fourth Edition (WISC-IV) with a Native American sample. The structural validity of the WISC-IV was investigated using the core subtest scores of 176, six-to-sixteen-year-old Native American children referred for a psychoeducational evaluation. The exploratory factor analysis procedures reported in the WISC-IV technical manual were replicated with the current sample. Congruence coefficients were used to measure the similarity between the derived factor structure and the normative factor structure. The Schmid-Leiman orthogonalization procedure was used to study the role of the higher-order general ability factor. Results support the structural validity of the first-order and higher-order factors of the WISC-IV within this sample. The normative first-order factor structure was replicated in this sample, and the Schmid-Leiman procedure identified a higher-order general ability factor that accounted for the greatest amount of common variance (70%) and total variance (37%). The results support the structural validity of the WISC-IV within a referred Native American sample. The outcome also suggests that interpretation of the WISC-IV scores should focus on the global ability factor.
ContributorsNakano, Selena (Author) / Watkins, Marley (Thesis advisor) / Caterino, Linda (Committee member) / Cohen, Sylvia (Committee member) / Arizona State University (Publisher)
Created2011
Description
Mexican Americans have an increased risk for type 2 diabetes and premature cardiovascular disease (CVD). The association of hyperglycemia with traditional CVD risk factors in this population has been established, but there is limited data regarding other non-traditional CVD risk factors. Thus, this cross-sectional study was conducted to evaluate CVD risk among Mexican Americans by measuring concentrations of lipids, high-sensitivity C-reactive protein (hsCRP), and cholesterol in low-density-lipoprotein (LDL) and high-density-lipoprotein (HDL) subfractions. Eighty overweight/obese Mexican-American adults participating in the Maricopa Insulin Resistance Initiative were randomly selected from each of the following four groups (n = 20 per group): nomolipidemic
ormoglycemic controls (NC), dyslipidemic
ormoglycemic (DN), dyslipidemic/prediabetic (DPD) and dyslipidemic/diabetic (DD). Total cholesterol (TC) was 30% higher among DD than in NC participants (p<0.0001). The DPD group had 27% and 12% higher LDL-C concentrations than the NC and DN groups, respectively. Similarly, LDL-C was 29% and 13% higher in DD than in NC and DN participants (p=0.013). An increasing trend was observed in %10-year CVD risk with increasing degree of hyperglycemia (p<0.0001). The NC group had less cholesterol in sdLDL particles than dyslipidemic groups, regardless of glycemic status (p<0.0001). When hyperglycemia was part of the phenotype (DPD and DD), there was a greater proportion of total and HDL-C in sHDL particles in dyslipidemic individuals than in NC (p=0.023; p<0.0001; respectively). Percent 10-year CVD risk was positively correlated with triglyceride (TG) (r=0.384, p<0.0001), TC (r=0.340, p<0.05), cholesterol in sdLDL(r=0.247; p<0.05), and TC to HDL-C ratio (r=0.404, p<0.0001), and negatively correlated with HDL-C in intermediate and large HDL(r=-0.38, p=0.001; r=0.34, p=0.002, respectively). The TC/HDL-C was positively correlated with cholesterol in sdLDL particles (r=0.698, p<0.0001) and HDL-C in sHDL particles (r=0.602, p<0.0001), and negatively correlated with cholesterol in small (r=-0.35, p=0.002), intermediate (r=-0.91, p<0.0001) and large (r=-0.84, p<0.0001) HDL particles, and HDL-C in the large HDL particles (r=-0.562, p<0.0001). No significant association was found between %10-year CVD risk and hsCRP. Collectively, these results corroborate that dyslipidemic Mexican-American adults have higher CVD risk than normolipidemic individuals. Hyperglycemia may further affect CVD risk by modulating cholesterol in LDL and HDL subfractions.
ormoglycemic controls (NC), dyslipidemic
ormoglycemic (DN), dyslipidemic/prediabetic (DPD) and dyslipidemic/diabetic (DD). Total cholesterol (TC) was 30% higher among DD than in NC participants (p<0.0001). The DPD group had 27% and 12% higher LDL-C concentrations than the NC and DN groups, respectively. Similarly, LDL-C was 29% and 13% higher in DD than in NC and DN participants (p=0.013). An increasing trend was observed in %10-year CVD risk with increasing degree of hyperglycemia (p<0.0001). The NC group had less cholesterol in sdLDL particles than dyslipidemic groups, regardless of glycemic status (p<0.0001). When hyperglycemia was part of the phenotype (DPD and DD), there was a greater proportion of total and HDL-C in sHDL particles in dyslipidemic individuals than in NC (p=0.023; p<0.0001; respectively). Percent 10-year CVD risk was positively correlated with triglyceride (TG) (r=0.384, p<0.0001), TC (r=0.340, p<0.05), cholesterol in sdLDL(r=0.247; p<0.05), and TC to HDL-C ratio (r=0.404, p<0.0001), and negatively correlated with HDL-C in intermediate and large HDL(r=-0.38, p=0.001; r=0.34, p=0.002, respectively). The TC/HDL-C was positively correlated with cholesterol in sdLDL particles (r=0.698, p<0.0001) and HDL-C in sHDL particles (r=0.602, p<0.0001), and negatively correlated with cholesterol in small (r=-0.35, p=0.002), intermediate (r=-0.91, p<0.0001) and large (r=-0.84, p<0.0001) HDL particles, and HDL-C in the large HDL particles (r=-0.562, p<0.0001). No significant association was found between %10-year CVD risk and hsCRP. Collectively, these results corroborate that dyslipidemic Mexican-American adults have higher CVD risk than normolipidemic individuals. Hyperglycemia may further affect CVD risk by modulating cholesterol in LDL and HDL subfractions.
ContributorsNeupane, Srijana (Author) / Vega-Lopez, Sonia (Thesis advisor) / Shaibi, Gabriel Q (Committee member) / Johnston, Carol S (Committee member) / Arizona State University (Publisher)
Created2011
Description
An accurate sense of upper limb position is crucial to reaching movements where sensory information about upper limb position and target location is combined to specify critical features of the movement plan. This dissertation was dedicated to studying the mechanisms of how the brain estimates the limb position in space and the consequences of misestimation of limb position on movements. Two independent but related studies were performed. The first involved characterizing the neural mechanisms of limb position estimation in the non-human primate brain. Single unit recordings were obtained in area 5 of the posterior parietal cortex in order to examine the role of this area in estimating limb position based on visual and somatic signals (proprioceptive, efference copy). When examined individually, many area 5 neurons were tuned to the position of the limb in the workspace but very few neurons were modulated by visual feedback. At the population level however decoding of limb position was somewhat more accurate when visual feedback was provided. These findings support a role for area 5 in limb position estimation but also suggest that visual signals regarding limb position are only weakly represented in this area, and only at the population level. The second part of this dissertation focused on the consequences of misestimation of limb position for movement production. It is well known that limb movements are inherently variable. This variability could be the result of noise arising at one or more stages of movement production. Here we used biomechanical modeling and simulation techniques to characterize movement variability resulting from noise in estimating limb position ('sensing noise') and in planning required movement vectors ('planning noise'), and compared that to the variability expected due to noise in movement execution. We found that the effects of sensing and planning related noise on movement variability were dependent upon both the planned movement direction and the initial configuration of the arm and were different in many respects from the effects of execution noise.
ContributorsShi, Ying (Author) / Buneo, Christopher A (Thesis advisor) / Helms Tillery, Stephen (Committee member) / Santello, Marco (Committee member) / He, Jiping (Committee member) / Santos, Veronica (Committee member) / Arizona State University (Publisher)
Created2011