Full metadata
Title
Passive thermochemical energy storage system for low power sensor modules for space applications
Description
Surface exploration of the Moon and Asteroids can provide important information to scientists regarding the origins of the solar-system and life . Small robots and sensor modules can enable low-cost surface exploration. In the near future, they are the main machines providing these answers. Advanced in electronics, sensors and actuators enable ever smaller platforms, with compromising functionality. However similar advances haven’t taken place for power supplies and thermal control system. The lunar south pole has temperatures in the range of -100 to -150 oC. Similarly, asteroid surfaces can encounter temperatures of -150 oC. Most electronics and batteries do not work below -40 oC. An effective thermal control system is critical towards making small robots and sensors module for extreme environments feasible.
In this work, the feasibility of using thermochemical storage materials as a possible thermal control solution is analyzed for small robots and sensor modules for lunar and asteroid surface environments. The presented technology will focus on using resources that is readily generated as waste product aboard a spacecraft or is available off-world through In-Situ Resource Utilization (ISRU).
In this work, a sensor module for extreme environment has been designed and prototyped. Our intention is to have a network of tens or hundreds of sensor modules that can communicate and interact with each other while also gathering science data. The design contains environmental sensors like temperature sensors and IMU (containing accelerometer, gyro and magnetometer) to gather data. The sensor module would nominally contain an electrical heater and insulation. The thermal heating effect provided by this active heater is compared with the proposed technology that utilizes thermochemical storage chemicals.
Our results show that a thermochemical storage-based thermal control system is feasible for use in extreme temperatures. A performance increase of 80% is predicted for the sensor modules on the asteroid Eros using thermochemical based storage system. At laboratory level, a performance increase of 8 to 9 % is observed at ambient temperatures of -32oC and -40 oC.
In this work, the feasibility of using thermochemical storage materials as a possible thermal control solution is analyzed for small robots and sensor modules for lunar and asteroid surface environments. The presented technology will focus on using resources that is readily generated as waste product aboard a spacecraft or is available off-world through In-Situ Resource Utilization (ISRU).
In this work, a sensor module for extreme environment has been designed and prototyped. Our intention is to have a network of tens or hundreds of sensor modules that can communicate and interact with each other while also gathering science data. The design contains environmental sensors like temperature sensors and IMU (containing accelerometer, gyro and magnetometer) to gather data. The sensor module would nominally contain an electrical heater and insulation. The thermal heating effect provided by this active heater is compared with the proposed technology that utilizes thermochemical storage chemicals.
Our results show that a thermochemical storage-based thermal control system is feasible for use in extreme temperatures. A performance increase of 80% is predicted for the sensor modules on the asteroid Eros using thermochemical based storage system. At laboratory level, a performance increase of 8 to 9 % is observed at ambient temperatures of -32oC and -40 oC.
Date Created
2016
Contributors
- Rabade, Salil Rajendra (Author)
- Thangavelautham, Jekanthan (Thesis advisor)
- Huang, Huei Ping (Thesis advisor)
- Rykaczweksi, Konrad (Committee member)
- Arizona State University (Publisher)
Topical Subject
Resource Type
Extent
x, 76 pages : illustrations (chiefly color)
Language
eng
Copyright Statement
In Copyright
Primary Member of
Peer-reviewed
No
Open Access
No
Handle
https://hdl.handle.net/2286/R.I.40817
Statement of Responsibility
by Salil Rajendra Rabade
Description Source
Viewed on February 3, 2017
Level of coding
full
Note
thesis
Partial requirement for: M.S., Arizona State University, 2016
bibliography
Includes bibliographical references (pages 73-76)
Field of study: Mechanical engineering
System Created
- 2016-12-01 07:10:16
System Modified
- 2021-08-30 01:20:18
- 3 years 3 months ago
Additional Formats